Rickenbacker 4003 Bass

Same as always.

It does one thing better than any other bass: It sounds like a Rickenbacker. There are plenty of modern basses that get a wider tonal range. You have to get a Rcickenbacker if you want that tone. If you prefer a different tone, there are much better modern choices that give much wider tonal range. If you were looking for an extremely versatile bass, this would rate a 5 compared to some others. The flatsawn non-reinforced neck has pronounced wolf notes that you have to work around. It also warps very easily if you don't attend to those truss rods religiously and you go through wide temperature changes. It needs some strengthening to raise the resonant frequency above the fundamental bass range. Make sure you get a reinforced neck if you want to eliminate wolf notes that plague you. I get tired of listening to fans of this bass talk about its character. Not all of its character is good. So it competed very well against old P-basses, J-basses, and Thunderbirds. Big freaking deal. That was the 70's, dude. I'm being generous here, not too critical. I'm actually looking to sell mine if I can get out without losing money.

RIC quality is all over the map these days. They are trying to increase production, and it really shows in the varying quality. I have seen everything from great Rickenbackers to ones that had the action of a dog turd. I have seen their necks warp as they season out. I mean REALLY bad warps. Sideways warps where the strings were actually off the side of the fretboard! John Entwistle gave up on their basses early in his career because he felt they had weak necks. I must concur from my own experience. The 4003 had dual truss rods added to address deficiencies in the 4001 neck. It helped, but it hasn't cured the problem. I would HIGHLY suggest that you only buy a used one and have it checked very thoroughly if you don't know how to do this yourself. Any bass neck at least 5 years old has done all the shifting around it's going to do (unless you abuse it). A new Rick bass is a crapshoot. Just a fact. The Jetglo finish is very pretty, if you just want a wallhanger bass.

Rickenbackers are very reliable, IF YOU GET A GOOD ONE! The next category tells you why you need a good one.

This category is below par for the reputation of the instrument, and highly variable depending on the mood of the day at RIC. If they are in a bad mood that day, you had best just hang up the phone and call back later. You only have a warranty if you bought it new and nuerous stipulations are met. If you buy NOS, some or all of your warranty is shot, as the 5 years starts the day it leaves the factory. I decided to be generous here, as some people have gotten good service. I suggest you BUY USED AND NEVER CALL THEM. They referred me to a private luthier to fix my problem, which was probably a manufacturing defect, if that tells you something.

My bass looked mint in the showroom, but I discovered neck problems later on. Maybe I can fix them. RIC doesn't care. The bass sounds good, but I want a wider range of tones. I will sell it if I can't resolve the neck problem at a reasonable cost. I would not buy the bass again. Spector, Warwick, Status Graphite, Peavey Cirrus, and a bunch of others have passed RIC and Fender a long time ago. Even Fender is reinforcing the necks of their basses. RIC has decided to stay in the stone ages. A shiny flashy finish does not by itself make a great bass, but it does look good in the showroom and gets a lot of Rick basses out the door fairly quickly. BUY A USED ONE AND CHECK IT OUT THOROUGHLY BEFORE YOU BUY. That neck is far from the most stable in bassdom. If you ignore this advice, you are playing dice with your money.

2003 Rickenbacker 4003...you know all the specs, if not just browse this site a little more.
Here's the rather poetic description off the RIC website:
"The Classic Rickenbacker bass - famous for its ringing sustain, treble punch and solid underlying bass. A subtle strip of binding graces the elegantly curved body and the Rosewood fingerboard. Deluxe triangular inlays and stereo capability are standard features."

2 passive p/u's, 2 tone & 2 volume controls, pickup selector switch. Classic design.

Mine is the BEAUTIFUL limited edition color for 2003 - Montezuma Brown. A tobacco sunburst type finish...very similar to their Autumnglo finish from the '70s. Best looking bass I have ever owned.

I also upgraded to the vintage silver tolex case. Well worth it. Very unique silver exterior & a blue crushed velvet interior. Almost as cool looking as the bass.

....and of course it's American made.

I am a Rick man through & through (this is my 3rd), but don't believe the lies that "Ricks have no low end". You can go from the classic Geddy Lee/Chris Squire/Roger Glover/Glenn Hughes tones to enough bottom to rattle windows from their frames.

I use it with a late '80s Fender BXR 400 through an Eminence 15" as well as a Peavey TNT 115 combo with the 15" Blue Marvel speaker. They both sound great.

Great 'Rick Clank' especially when played with a pick. Nice full finger tone too.

Sounds flat out evil when I run it distorted and/or through a wah.

I bought mine from Mike Parks @ The Music Connection/Rickenbacker Page. He's a legendary Rick dealer & it was ready to go out of the box as soon as it arrived. Even UPS couldn't screw it up!

Playes beautifully.

Gorgeous, perfect, flawless.

I've only had it for a month, but it's solid as a rock.
One of the tone control knob silver tops fell off, but that's a typical Rick issue. One drop of glue, problem solved.

Rick finishes are legendary. Great gloss that will last forever.

New Rick strap buttons are a huge improvement over the old style ones. They are strap lock ready.

Always take a back up you fool!

I've got a friend at Rick so my opinions may be biased, but this is my 3rd Rick & they have always been a dream to deal with.

I've been playing for about 18 years & own the following basses:
1974 Rickenbacker 4001
1978 Rickenbacker 3001
1990 Fender Jazz Bass
2001 Gibson Thunderbird.

Do your research. I almost got the vintage style "toaster pickups", but wisely decided against it. The standard hi-gains are much hotter & give you more of the classic Rick growl.

Steal it...I dare you. Your will had better be in order.

I love everything about this bass. The ltd. ed. color has got to be my fave feature.

Rickenbacker 4003 burgundyglo, 1981
20 frets, tone and volume control for each pickup, 2 single coil original ric pu's. Modified: stero/mono switch- you can use two normal mono cables to run it "ric-o-sound" which sound really great especially with the neck pu "dry" and the middle pu with wahwah or anything else.
everything on this bassgutar is original (except for that stero switcht)
I give a 9 because of the great "STEREO" sound

I play many different music styles from heavy old school rock (sabbath) to nu metal and they all told me it sound great. sometimes it gets noisy when i hit the strings very hard, but that is obvious.
Likes: Sounds very cool. Thru the right amp configuration it sounds aaaaaaaaaaaaaaaaaaaaaaa great. i played thru a 8x10. sounded great.
i play thru a 1x15 with an old 100Watt tube amp - great sound
well- if you like that ric sound (I do) you'll love it...
I give an 8 because sometimes i have hum on it on live gigs (not in the rehearsal room) when there are a lot of lights switching on/off
No- it sound fantastic---10

I bought is used in 2003.
I put flatwound strigs on it an sewt it up for my needs. So i can't tell if it was set up well by rickenbacker people.
After 22 years the finish has marks that show the basses age - it5 has to be that way!

Very reliable. Until now. I take care of my axe (it is HOLY to me!!)
Whatever. You can destruct anything.

I'm from Germany. The instrument is 22 years old. I won't call them.

I give a 9. I can't give a 10, bacause it means "perfect". And the might always be something better. I don't think so. I trid Fenders and Musicman and... I LOVE Rick. But this is THE AXE. I love it and won't evr sell it. Perfect action and sound (to me). I love the neck thru body construction and everything!!

A Brand new Torquise Ricky with all the standard features. It's all been stated before in the previous posts.

I had a 1974 and sold it because I liked the new color. The 2003 does not sound like the vintage bass at all. I'm not sure why it sounds so different. I LOVED my 1974 and ran it with two amps for Ric-O-Sound but never even got that far with this bass.

TERRIBLE! Chrome was falling off the bridge and the finish had fisheyes on the neck(solvent pops)so bad that you could feel them with your hand. It appears Ricky quality is now a historic footnote. Set up was equaly as bad. It appeared to have never been intonated and the action was 1/4" high. I play very hard and have extremely high action on all my basses but this was ridiculous.

This bass scared me. Even the cheapest Chinese import blew it away in quality. I sent it back to Musicians Friend. They told me it would be sold as a blem..

The worst new bass I've ever purchased since 1968. I contacted Ricky Customer Service about this and after several days got a repsonse to send it back under Warantee and they would "See what they could do"

No one cared and it was easy to tell....They have lost it.

Pure Garbage....Buy a vintage but watch out for the neck problems they had in earlier 4003s. Make sure it is the model with the double truss rods...

Nothing has changed. See other reviews.

Nothing has changed. See other reviews

HERE'S SOMETHING THAT HAS CHANGED!

What is going on here? I purchased a brand new Turqoise 4003 from Musician's Friend. What do I find? Chrome literally falling off of the tailpiece. Fisheyes in the neck paint so bad you can feel them with your hand.

Another manufacture falls apart. The Korenas and Chinese manufactures have significantly higher quality. I'm crushed and will never buy a Rickenbacker product again....

Scared to death of Rickenbacker now that they obviously have no quality control...

Not worth calling when you ship this junk...

TERRIBLE.....The set up was equally as bad AVOID! I play very hard and have high action on all of my basses, but a 1/4"? Who plays with that? BTW- I'm no rookie at this. I'm 50 years old and have played over 25 years. I currently own approximately 20 basses and have gone thru at least 50 in the last 10 years.

This is the story of an awesome Rickenbacker 4003, in JetGlo finish (black), made in February 2003, and purchased used in July 2003. It is in absolutely as new condition, except the fact that the bridge pickup cover has been removed (but supplied with the bass). Anyway I prefer playing without this cover, so I even didn?t have to remove that cover.

It was delivered with all its original accessories: SKB hard case, polishing cloth and hex key for saddle adjustment. Unfortunately, Rickenbackers are never supplied with the key for truss rod adjustment. But I have one, so that's not a problem.

The features are those everyone knows, and that can be found on the RIC website.

I work simultaneously on two projects : a progressive rock band (currently studio working), and a Beatles tribute band (gigs). For both of these projects, the sounds I get from my 4003 are perfect.

For the studio, I basically plug my 4003 into a Johnson J-Station, which has a great SVT emulation. No much tweaking needed to get a heavy tone, something between Geddy Lee and Chris Squire.

For gigs, I use an Ampeg B-100R amp, and I add a Tech 21 SansAmp Bass Driver DI in between. I have a fat tone, and even though my bass is mounted with roundwounds, my tone gets very close to Paul McCartney?s.

The 4003 is a bit noisy, but as far as I experienced, all single coils are a bit noisy.

When I received this bass, the strings had been changed, and I didn?t like those that were mounted. I even don?t know what brand of strings that was. The action was a bit high too, but I must say I play with VERY low action.

I mounted Rotosound SR66 strings (45-105), made an adjustment of the saddles, and got a perfect action in seconds. This means you really can have a very low action if you want. Many basses don't allow this.

The finish of this bass is perfect. No flaws at all. It appears that high care is given to the making of these basses.

I always have another bass when on stage (a Fender Precision), but it is dedicated to some songs, not as a backup. Of course, if I experienced any problem on stage, I?d use the P as a backup, but I never had to do. The 4003 seems very solid and reliable, and if I had no other bass I wouldn't be afraid to gig without a backup.

I didn?t have to deal with the company.

I?ve been playing bass for almost 28 years. I knew what I was buying because this is my fourth Rickenbacker through the years. There?s nothing I hate in this bass, but what I love the most is the neck. Perfect for me. And of course this unique tone that no other bass can mimic.

If it was lost or stolen, I?d immediately get another one. This is my main bass, and more specifically in my progressive rock project this is THE bass of MY tone. And I?m not afraid to say that the way it plays and sounds inspires me every time I build a bass line. There are many of my bass lines that I believe wouldn?t sound good if played with another bass model. No other bass ever inspired me like a Rickennbacker does.

Made in 2002 in the US. Maple Glo. Comes with case. All the other features are here alredy, so I won't bore you with that.

I play Contemporary Christian and Classic Rock. This bass is perfect for both. It nails the old Rush and Yes stuff, and really sounds good in church. It can always be heard through the mix. I'm playing through a David Eden WT 300 head, Eden 210 cab and GK 115 cabinet. Sounds amazing. Very rich, sweet sounding bass. Like nothing else. You could take 1000 different bass guitars, play each one, and the Rick would be the easiest to pick out. Nothing comes close to the sound. The pickups are a little noisy, more than I would like. I've only played on stage and it's great. Compliment after compliment on the sound.

Factory setup was bad. Action was way high. I lowered it as much as I could, but still higher than I'd like. Pickups were equally high, and needed to be lowered, but that was the easy part. No flaws in the finish. Everything was tight.

Haven't had it very long, but I don't forsee anything going wrong with it.

I sent a few emails, and usually don't recieve a reply for a few days. Up to 5. That's not too good.

I've been playing off and on for 11 years. I actually sold this bass to buy a Stingray. I miss it now. I was displeased with the action, so I sold it for something easier to play, but also gave up the sound that I love so much. I will buy another one day, but it will be a 4001v63. I don't care for the binding on the 4003, the cheap plastick pickup cover, the sharktooth inlays, and the action on this particular bass. I would recommend playing one before you buy it

2002 Fireglo 4003. For details go to www.rickenbacker.com

Awesome! I put some Rotosound JAzz flatwounds on mine and it sounds alot better then the rounds that came with it. I'm running it through a Vox t-60 and I have no complaints at all. This bass will keep you interested.

High action but I was able to adjust it pretty easy. I have small hands and its still feels good to play. I never feel like I'm not going to make a note in time.

Seems solid! Its freakin heavy!

I haven't broken it yet.

I can't put this thing down. I was going to buy another hofner bass after selling my last one, (long story) But I decided to try something new. I was glad I did! This bass is like a drug!!!

Mine is a 2002 4003 in Jetglow (black). Its absolutely bog standard - 2 ricky pick ups, volume for each and tone for each. It has the ri-o-sound option too, but i've never used it. The bridge pick up had one of those awful covers, but i've removed that.

It came in a gorgeous fully lined ric case that smells 'new guitar'.

The sound is great! I played a music man in my band prior to switching. I got sick of the music man having poor output volumes on the G and D string. I plugged this beauty in Sound Control and was totally blown away! Straight into my Ashdown (300W 1X15 and 10X10 Hartke) this bass sounds perrrfect. Lots of bottom end and too much top! I just kill the treble on the amp and its just brilliant.

I use a carl martin compressor for studio work, but find absolutely no need for it live as the pick up out puts are very even and warm. Add in to this a chorus pedal and wow! this baby sings!

As said earlier - the pick up cover has to come off as I believe it seriously compromises your sound. Its positioned right in the sweet spot for finger playing!

Basically, when people talk of clank and fret buzz from rics they are just admitting their own 'ham-fisted' technique! Play her nice and light and let the pickups do the work.

Odd, I assume Soundcontrol carry out setups prior to releasing their goods. Rockenbacker are known for their terrible set ups, but mine was fine straight off the shelf (obviously the pick up cover had to come off - those things annoy me).

The bass was finished to a very high standard, although the black finish shows every scratch and finger print on it under lights (I'm glad i don't have a black car!!!). The pick up selector was a little noisy due to being sat on the shelf unplayed for a while. Some DW40 in there sorted it out!

This bass is an absolute animal. They are certainly built to last (apart from minor deterioration in the paint work). Everything on the bass is built for the long haul. I don't believe I will have to replace anything. Oh and genius! Rickenbacker fit it up with schaller strap-locks!

Would I use it at a gig without a back up??? WHilst I totally trust the bass I always carry a spare (spector). If I had to take just one bass, it would by the Ric!

I wouldn't know and hopefully will never have to contact them!

I have been playing bass for about 10 years. I suffer from a condition called 'gottahavit. Basically this condition means I see a nice bass and I've got to have it. The side affects are never having cash in the bank. The positives are that you get to use a lot of differenf gear. However, I think I've found a cure....... My Rickenbacker!

I've played warwick, spector, fender, gibson, danelectro, G&L, music man etc and to be honest nothing comes close to this!

If I lost it or it got stollen/broken I'd probably cry! .... then buy another!

Why do I love it? It looks like a porn star and sounds like a bass should!

This is a review of my Rickenbacker 4003, purchased used in July 2003 in mint condition, since it was made in February 2003.
Many people here, before me, described the features of this bass. I'll just specify that this bass is in JetGlo (black) finish. Looks awesome.
About the features, I'll add that I never use the Ric'O'Sound (stereo) output.
This is a passive bass with simple features, but it has all you need. Perfect for me.

This bass is very versatile, and the sound you'll get will depend on what you do with your fingers, and which strings you'll mount. For me, it's always been Rotosound Swing Bass (RS66) in 45-105 gauge.
It's a very rich sound, and depending on the controls you go from very agressive tone to very smooth. But you'll always cut through, and that's one of the most characteristic things in the Rickenbacker tone.
I use this bass with an Ampeg B-100R. Either with or without my SansAmp Bass Driver D.I. in between, and either when I player with fingers or with a pick, the sounds I get are awesome.

Well, that's an interesting point. As I said above, this is my 4th Rickenbacker. I had two 4001's and another 4003 before this one. I often switched to something else (Fender, Ibanez, Status, Music Man, etc.), and always came back to a Rickenbacker. I believe this is because the Rickenbacker neck is the one I feel the most comfortable with.
As I said, this bass came in mint condition, and was perfectly setup.

My 4001's never caused me any trouble. I had some with my previous 4003, but I won't say whether it was a manufacturing default.
I have owned this new 4003 for only a few weeks, so I can't tell for the moment.

Didn't have to deal with them.

Probably one of the best basses in their price range.

Nothing I can say that hasn't already. Made in 2002. Mapleglo finish.

Great sounding bass. All that I expected. I used to really be into Rush and Yes, and if you are then this is the bass to have. Always sounds bright, cuts through the mix really good. Pickups are noisy. I've run it through a David Eden WT300 and David Eden 210 cabinet. Not a lot of variety in the sound. It does it's thing well, and that's it. If you are reading this, you know what these sound like. People love it or hate it. I love it.

Action was awful. Terrible. Pathetic. I could go on... Bass was finished beautifully. They should take as much pride in setup as they do in the finish. Wood looked great. Everything was tight. My first bass, a Sears Harmony, had better action. Absolutely pitiful. I brought it to a Luthier, and he couldn't do anything to help. It was that bad!! The guy felt sorry for me. The binding around the edge is awful. Digs into my arm. It's heavy!! The shark inlays are cheesey too. Pickup cover is in the way. Take it off, and it makes things worse.

Had it 6 months, and sold it. Not sad to see it go either. I know people who have had them for a long, long time. If this bass is your thing you will have it forever. Not for me.

Rude. As useless as tits on a bull. Contacted them about the incredibly high action on this bass, to see if they could maybe take it back and replace the nut. Got a big hell no!! Screw them! Pitiful.

Been playing off/on 10 years. I have a Stingray that I love. Wouldn't trade it for anything. I wish I'd never bought this bass. I lost $300 bucks on the deal. If someone would have stolen it, they probably would have brought it back with that pitiful action.

Made January 2003 in Santa Ana, CA. Standard 4-string Ric bass in Jetglo, maple body and neck w/rosewood fretboard. Won't bore you with the features, the others have listed them enough. More features than you'll find on most basses, though. Being able to switch between pickups is awesome! Oh, and the bridge pickup cover doesn't bother me a bit, so I'm leaving it on.

I play modern and classic rock, and let me tell you, this bass can do it all. Not a great slapping/popping machine, so get a J-bass if you want to do that. For straight-ahead ballsy bass sounds, you can't beat this bass. I've played P-basses, J-basses, and an Ibanez soundgear, and this thing smokes them all. (I have to say that the Fenders are still excellent basses, though.) I thought my amp was the problem for my lack of power and volume, but I was wrong, it was my old bass! Once I bought the RIC, my amp came alive. Great sound on all pickups settings. Did I mention how nice it is to have a pickup selector on a bass?? My bandmates love it and don't want me to play anything else. I'm only too happy to oblige them!

My only complaint was the action. I'm not sure if it came that way from the factory or if Music123 set it up that way, but the action was way too low. I got fret buzz anywhere below the 12th fret. I'm going to raise the strings a bit, that should fix it. Finish is excellent, although jetglo (black) is hard to keep clean. It'll show every little smudge, but it still looks awesome.

I think this bass is rock solid and would withstand any live playing. Wouldn't recommend jumping around with it unless you get some straplocks, though. My strap came undone on the bottom of the bass, but fortunately I was able to catch it before it hit the floor. Be careful with those straps. The bass feels solid and I'm sure it will outlive me. The neck-through design makes it even more dependable.

Haven't had to contact them for anything and probably won't have to, given the quality of this bass.

Been playing guitar for 18 years (also own a Ric 360 w/vintage pickups) and have been playing bass for about 7 years. Been through many basses: Guild Ashbury (with the silicone strings), Fender Precisions (Mexican and American), Fender Jazz (Mex), Rogue Violin, and this one. The Rogue is pretty cool for early McCartney tones, but not much else. This bass is expensive, but in my opinion, it was worth every penny. This is the best bass purchase I have ever made. I'm sure I will never regret buying this bass, and neither will you.

I Bought The 4003s Ric in 1985, Blue with Black everything else, Good ole USA Made Bass, 4 string so on so forth... Great case, still lasting after all this time

This one is one of many that I had owned, you have to play them and pick the one that suits you, this one does funk with the best of them and most of your sound does come from your Amp, I use my trusty 1967 Ampeg SVT, until 2 weeks ago, I bought a Carvin R1000, retired the SVT. This thing can sound like a Harley growling or the sweetest softest Bass you've ever heard, it's call Dynamics people, the act of playing soft with your fingers or plucking very hard with a plectrum (pick).. you can get different sounds with the 3 way switch,but you can achieve that by moving from the bridge to the neck pickup, and I've never removed the cover to the pickup on this one, but I have had a couple that came with out them and I hated it, I use it to anchor my thumb...I've used it in the studio and live, it has never failed me either way ever... I don't expect it to either........For those looking for that Yes sound, use over driven Tubes...... Turn your pre-amp up and your master Volume down, natural overdrive, like a tube guitar Amp, The Who's Bassist used a Guitar Amp for his Highs to get that sound.
Only noisy when your near those florescent lights or a TV

The action came low and has remained there for 18 years,I play funk, jazz Rock and finger tap... The Pickups came adjusted just fine, but every player tweaks to their tastes.. Mine was totally flawless, but, I ordered mine this color and Binding, Have only seen 3 this way in 18 years

Beat it on stage for 18 years, still going, no Pits or rust, Black Hardware lasts a long time.. I've only had to adjust the Truss rod twice in all this time, and I never take a backup bass to a gig. I used to have to take a backup for my Fender, as it broke strings.. but I got ride of that problem long ago, Shame it would be worth over a grand now, and I paid $300 for it in 72, and it was a 66 jazz, live and learn...

In 18 years I've never called them.... though from what I heard here, they should move up to the computer age and reply to e-mails... They were never into giving anything away, even back in the early 60's

Been playing 30 years, I have my Ric, a PJ Bass a 5 String Artist series Samick.. My old Ampeg SVT, a Peavey Sessions Bass head(Tube)
A Carvin R1000, a 2,10 cab, 2 15 Cabs, and an 18 sub-woofer
I have a very Big Dog protecting this stuff, I'll be buried with that Bass, and yes, If I did loose it, I'd order another one, can't beat the sound, look, sound and Oh Yea, the LOok...
I do have to say, don't mail order it from a mail order house, go try them and buy the one you like, or go to a Ric dealer and Special Order one, you won't be dissapointed.....
PS, Find a Great Guitar Tech if you ever need anything done to it. And I don't mean just your run of the mill tech, look around at Vintage shops, ask questions, like have you ever done one before and can I see it or pictures of it.. My tech has them, and took pictures of mine before he gave it back to me......., It's called Pride in his workmanship in working on exquisite instruments....

Well... I tend to think this category is somewhat... Useless for a rating. It's a passive bass, and in all honesty, I used to have an active bass and I didn't like it. I left all the knobs at middle position, but I still had to change the battery and I could leave a cord plugged in, which I found somewhat annoying. Anyways, Ric 4003 in Jetglo (black) made in the good ol USA. Came with a Hardshell Case that is form fitted in the SKB style. Nice. The lack I saw was that the strap pegs are Schaller straplok style, but the bass came with no straploks. So I had to buy some and use those. That I found annoying, but not really a big deal. 2 volumes, 2 tones and a 3 way [switch, of course].

I'd have to say I like it, I like it a lot. As for variety in sound, I'd say there is a decent amount. People tend to ignore their amps in reference to this I would have to say. As far as the switch goes, sure it makes a small variation in sound, and twiddling with controls does some stuff too, however, when I made my own bass (a bad-ass custom flying v) I didn't put any controls on it, if the bass has a good character, which the Ric really really does, then with a halfway decent amp you can get lots of great sounds. I've never found it to be more noisy than say... a Tokai Jazz sound, which is relatively hum-free.

It was actually set up perfectly when I got it. Mine has very low action, but I did have to do some setup after I changed away from the Ric strings that came on it(I believe they put on their special lighter gauge strings to try and keep you with them, I didn't like them though, they were floppy). I did it myself though, no problem, and the double truss rod didn't prove to be too impossible. The finish is really nice, and cool. Despite being solid black, it's possible to seen the wood grain through it. Of course no bass is bullet proof, so it has microscopic scratches by now, but on the whole it's a pretty tough little guy. Nice thin body siddles up close to the body and it's neck is reminiscent of a p-bass, but fairly easy to play. There is a certain... stickiness, that's true, but after playing for a few minutes the oils from my hand make it smooth sailing.

Well I've had it for a year and it hasn't proved to be too tough a beast to handle. The finish will probably survive past my death, and perhaps I will be buried with it. I'm kinda... paranoid, so the whole backup thing... that's just common sense, strings break, etc. The hardward is still nice and shiny... and basically this bass would survive hell easily.

I've never called them or asked for anything, seeing as the bass has never crapped out on me.

Well I've been playing for like... 6 years I guess, which in the world of music still makes me a newbie though. I'm in a emo/rock band and this bass cuts through in a way that really complements that sound. I have a Tokai Jazz sound, and a custom flying v and the three basses have different sounds, but I'd have to say I love the Ric like none other, it's tough to beat, of course for a grand I guess that makes sense, but I say it's worth every penny. I would have to buy another one if It was taken from me, but I would do everything within my power to get this baby back. As for the whole "good sound, good amp" thing I said up there, I suggest the Ric through an SWR bass 350, BBE sonic maximizer, and a nemesis cab loaded with eminence drivers. I tell you this thing has all the gumption you'll ever need, and you won't be dissapointed.

Made in July 2002 in the only place Ric's are made.. California. It's a 4 string model, 20 frets, 2 volume knobs, 2 tone knobs, a 3 way switch to change between pickups. Passive electronics, maple body. This one is the Mapleglo finish. Rosewood neck. Came with Rickenbacker case (that by the way is very nice. bass fist perfect in it.) much better than the older cases, or the silver vintage cases.

This bass has the perfect sound for the kind of music I like to play. I've always been a huge Rush fan, and a big Yes fan also. So this was obviously the bass for me. In my opinion nothing sounds better, but like I said... that's my opinion. If you're reading this you probably already know the sound, and if not... go pop in an old Rush album (i.e. Freewill is a perfect example), or you can listen to Yes's Roundabout. You're going to get a sound close to that. It won't be just like that, because those guys have a lot of other equipment that goes into their particular sound... especially Chris Squire on Roundabout. That's the tone I've always wanted, and will probably never get. I'm sure he's got about 50,000 invested in that sound. I play gospel music in church, and this bass sounds great. Never muddy. Always bright, and cuts through the mix very good. I don't find that the sound is very versatile. I've read a bunch of reviews on here that say it is, but I don't think so. It's pretty much just has one sound. It does that sound very well, but if it's not what you like than certainly don't buy one thinking you can change it. This bass always sounds very bright, and like it has new strings on it no matter how old they are. Great Sounding bass! It's the best feature of a Rickenbacker.

When I got the bass to my house (I had to mail order it, because none of my local shops deal with Ric) the action was bad. No, make that awful! I played my friends 1979 4001 before I bought this one to make sure I could get comfortable with it, because they have a different feel than any other bass you will ever play, and the action on his was awesome. I drove out to the nearest dealer to my house (which wasn't very close), and the 4003 they had in the store was awesome too! I didn't buy that one, because I didn't like the color they had in stock. I brought the strings down to where they buzzed, and then up from there. Guess what?? I was right back to where I started!! So, I brought it to a luthier, and had him adjust the neck which was a little off from traveling UPS ground in the middle of winter. He couldn't do any better. He was embarrassed to give it to me with the action so bad! I'm past the return policy from the place I got if from, so I'm pretty much stuck. I'm adapting to it, but it's so bad that I actually get cramps in my hand. The pickups were set just as high as the action, so they had to go down about an inch or so. The bass is beautiful. No doubt! I get compliment after compliment on the looks, and sound of it. I believe the problems is that the nut is just cut bad. Another thing is the pickups are very noisy! Very Noisy!!! Can't give you a good score here Ric. This action is ridiculous!!!!! My first bass... a Sears Harmony had better action.

I think this bass with withstand pretty much anything. The finish seems to be top notch. The strap buttons are small, so you may want to invest in straplocks. I always like to keep a backup on hand.

Not very helpful. Send them an email, and you might get a reply. Then again... maybe not. Depends on how they are feeling I guess. And when they do reply, it's almost better if they didn't. I've emailed them several times.. gotten a few replies, and zero help!! Comes with a 5 year warranty, but you have to mail the warranty card in within 10 days of purchase date. And as you know, you can't return these without losing 15% once you mail in that card. Online registration would be great. You know that website you have people?? USE IT!

I've been playing off, and on for 10 years. I've owned a couple of Ibanez basses before this one. The Rickenbacker has a far superior sound, and look to those, but the Ibanez's blow it away in the action department! Completely away. If it were lost, or stolen I would buy one only if I could play it first. Buyer beware when mail ordering!!! I love the sound... HATE the action. These are great sounding basses, but make sure you play it first. They are all hand made, so everyone is different. I got a bad one. I hope if you read this, and buy one that you get a better one. P.S. Good luck with their customer service

Made in 2002 in California. 4 string, 20 frets. 2 volume, 2 tone knobs. Stereo input jacks. Passive electronics. Mapleglo finish. Maple body. Rosewood neck. Came with Rickenbacker case.

I'm a huge Chris Squire, and Geddy Lee fan. So this was a no-brainer for me. Love that sound, so I had to have one of these. Sounds as close to those guys as you are gonna get. Don't expect to pull this out of the box, and it's going to sound just like Chris Squire's Roundabout tone. No sir. You're gonna need a ton of other stuff to get that sound, but it's pretty close. I play gospel music too, and it works great with that. I have a Peavey practice amp at home, and an Eden head, and 210 box at church. The pickups make more noise than anything I've ever heard. It's really bad. If you're reading this you know how it sounds. It has one sound, and it does that well. You're not going to get a lot of variety out of this bass. You can get a quiet Rickenbacker tone, or a loud Rickenbacker tone.. that's it... I love the sound. Hate where I got it from, and Rickenbacker customer service.

Setup was awful. Strings were high as giraffe pooh nanny. Neck seems a little twisted around the 12th fret. The neck is sticky too. Hard to move around very fast on this one. I lowered the strings until they buzzed, and then up from there. Action still sucks. The finish on it was beautiful, but playing it is a nightmare. Also, the neck seems to have a small gap from the top body wing. One of the input jacks quit working after 4 weeks of having this bass.

Haven't had it long, and I'm getting rid of it so I really don't care if it dies on the way back. Seems to be built strong.. Finish should last a long time. Strap buttons are way too small. Good luck adjusting the truss rod, or getting someone from Rickenbacker to help you with it!

This is the part I've been waiting for. Rickenbacker customer service is awful. I bought this from Musicians Friend (never again!!) only b/c they were the only ones who had it in stock. Rickenbacker makes you mail in (that's right!! snail mail) the warranty card with in 10 days of purchase date. By the time I got it in from Musicians Friend, I had to rush deliver it over to them. 4 weeks after I got this bass one of the inputs quit working. I called Musicians Friend, and because I had to mail in the warranty card so fast, now they can only take it back if they charge me a 15% restocking fee. Or I could send it to Rickenbacker. I emailed someone at Rickenbacker, and he says they never got my warranty card, and I'm pretty much out of luck. Take it to a Luthier. You're lucky I don't live in Cali punk!! Rude, and NO HELP AT ALL!!!! I WILL NEVER BUY ANOTHER RICKENBACKER PRODUCT EVER, EVER, EVER!!!!!!!

I've been playing for 10 years, and I've always wanted a Rick. I've played a few before, and they were great. I just happened to get a lemon. I understand that happens sometimes, but they haven't tried to help me one bit! I'm going to take it up the tailpipe, and let Musicians Friend get their 15%, just to get this junk off my hands. I'm going buy an Ernie Ball from a LOCAL SHOP!!! I love the sound, and hate the way they treat customers at Rickenbacker. I've always wanted one of these, and they certainly ruined the experience for me. If you're thinking of getting one... Good Luck. Hope you never need help with it.

This bass has it all!!! looks,feel,sound.did I mention looks? i have the jetglo and it really glo's. lots of crome.

i have a fender p,a fender jazz,and a rogue beatle bass(that sounds better than a real hofner)i love this bass.i love the sound of this bass.i love the mellowness of this bass.i love the punch of this bass.I LOVE THIS BASS BETTER THAN MY FENDERS(but the same as my rogue)

the bass was set up great right out of the box.and the action was right on for me.i lie it low.as for that guard over the rear pickup,i left it on.i play with a pick anyway (as everyone that does rock and roll should)no flaws and finish is to die for. but thats rickenbacker

I never owened a ric until now so i will let you all know in a few months or so.

dont need them yet

i have been playing 22 years and ive owened just about every bass there is but deing a bass player we are always looking for that sound well i found it with this ric.and my rogue.it it got lost or stolen i would buy another one that day.

My Rick was made in August, 2002 and is made in the US. I am not going to cover the rest of these topics cept that I purchased the "Jet-glo" with white binding and chrome - reminds me of a '56 chevy! I got what I expected!

A long time ago...I owned a 1985 Tobacco sunburst Rick 4001...as much as I loved that bass, I've always wanted a Black Rick (Thanks Geddy!). It sounds like a Rick...I am playing through a Sans Amp Rackmount RBI, Behringer parametric EQ into a SWR Bass 750 and have dumped the sound through a Hartke 4X10BXL and a 4.5 Bass module. It is noisy...needs better shielding. I also own two Peavey Cirrus (would that be Cirri?) basses (4 and 5 string). I mostly play rock, mostly. I do like funk, suck at Jazz (I'm not that good!) but have always loved Rush. It has the sound that I wanted...nuff said.

The bass was set up just fine. Like everyone else did, I removed the annoying plate across the bass pickup. It had no flaws, just a beautiful black finish. Good on you Rickenbacker!

Well, I won't know how it will last but if it is anything like my first Rick was (had to sell it for food for my family!), I expect it to last a long time. I am going to replace the strap buttons...nothing else needed replacement...

Okay Rickenbacker, move into the now! There's this thing called the internet and like all my other equipement, I was able to register their warrenties online...tsk tsk! I can't gie ye a 10 on this one!

I will give the bass an overall 10. I believe that I am rating the guitar based on my expectations and it was everything that I expected it to be and then some. Now, nearly 20 years after selling that tobacco sunburst Rick I own a black one!

This Rickenbacker I own is one beauty. The Fireglow (Red sunburst) is the reddist of reds and fades into the peachest of peaches...MMmmm. Bound with pure ivory plastic around the neck and plush crushed banana like pearl triangles on the neck may make this bass good for the other swingers who enjoy pink ones...but this still looks killer. Big fat tunas look like they could open cans of tuna...which most of the u.s. pop likes...I could smell it! Maple Body wings, Rock maple neck, Rosey woody freat boardy! 2 fat single coils...one deep in a bezel...crome baby. Sweat!

If you like Geddy Lee, Chris Quire, Lemmy, Paul McCartney, Geddy Lee and Chris Quire...you'll love this bass. It sound beutiful through 15's and 12's with at least 300 watts of power. Bright, full, aggressive, trebly...but turn the knobs and it's plushy wushy...I love that word.

This bass might sound good...but the set up sucks...I rather eat penut butter with out milk for 10 days stright. The neck has a mind of its own.

People in california should just make a pretty bass that plays good, not a preaty bass that sounds good. I'd rather play an aria pro bass while getting my toe nails removed then sown back on with the strings. People from Cali have sunstroke and have surfboards in areas that shouldn't be reveiled. Poor poor poooooooor. The serivce in cali is not like Geddy Lee (Garry Lee Weinrib for your information), chris Sqwiyer, Lenny, and Saul MacAndcheesecartny.

Like I said...if you like Geddy Lee, Chrissy Squirey, Paul MacNext for the grave, Ringo Star's last, and Lemmo..just say Yoko ono...you won't like the support.

If you like Geddy Lee Weinrib, Lemmy, Chris Squi... oh forget it.

1990 Ric, USA, 4 string with passive electronics.

Great sound a la Ric.

Geat action, as long as a pro makes the adjustments.

I've played over 100 gigs with it over a 12 year period. The hardware rusts, and I had to replace some pieces. The finish is not that good, and has faded.

I ordered spare parts for it and the service was ok, except for the rude surfer dork that took my call. Fire him!

This is my third bass, and the only one I ever kept. Would buy another, but this one is still great.

u've heard them already, passive pickups, 20 frets, 4 control knobs etc. fireglo finish, beautiful looking instrument of course. came with custom hard case, very nice, but it's like carrying a coffin!

very disappointed, didn't sound anything like any other rick i heard. sure its got that original growl but it lacks power, sound options and doesn't cut as well as i thought it would, its passive after all. sure, if ur a rock star who has tens of thousands to spend on amplification and effects such as fully parametric equalization, it might sound a bit better! or perhaps if u were chris squire and had his super powered custom rick with the massive pole pieces and the equipment i mentioned above, u might get close! not impressed at all.

action was adjusted from original factory settings, quite buzzy still, and the bass is murder to play finger style (there's no comfortable way of resting ur thumb, and i find that my fingers stick a lot because of the pickup height, if its too high, it's far too poppy, if its too low, u stick!). if ur a standard bass player who doesn't play a lot of technical chops ull be smiling, but if ur like me and like to go on a bass wank-fest from time to time (ala flea, victor wooten etc.), ull struggle with this bass (and as others have said before, its one of the worsed bass guitars out there for slapping!). perfect for pick playing, but i don't play with a pick! i guess this bass is just made for vintage 70's prog rock, does really satisfy eccentric modern music!

its built like a tank, duel truss rods, neck through body, gorgeous finish thats pretty durable. it all looks very pretty, but thats the problem, its a very expensive "good-looking" bass, that lacks smoothness and balls!

i've been playing for 5 years (ive written a review of the 4003 before, wanted to conclude my thoughts after almost 6 months of having the bass!), and i still prefer to use my beaten up yamaha RBX 460 with a zoom 506II effects patch, i can't believe it cuts better than the rick! shortly after buying the rick i played a stingray live, new strings, through a peavy black widow. fuck...me! no bass has compared to the stingrays power and cut, guess what im going to get as a replacement...:-D my suggestion is, buy it if ur rich and want to add to ur bass collection, it has got a totally individual sound. buy it if u play in a classic rock band or a covers band that doesn't involve a lot of advanced playing. do not think about forking out the cash if u play slap, tap, fast finger styles or any other advanced techniques (i made that mistake and now i have a very expensive ornament!).

Fireglo, Made in 2002 in good ol' USA... same as in previous reviews, and that's a mouthful...

RIC tone is killer tone... lots of sustain, punch, and that signature growl... When I switch the p/u to the neck position, I get somewhat of a fender P type sound, with both p/u's it's growlin' and groovin', superior to a jazz bass, in my opinion. Some of my favorite bassists have used this bass (or the 4001), such as Paul McCartney, Chris Squire, and Geddy Lee... not bad company at all... Check out McCartney's new Driving Rain CD and listen to "Spinning on an Axis" and there's that RIC tone in all it's glory (and his RIC goes back to the mid-Beatles period!). I love it, it's a real classic all the way.

This is where RIC's depart from just about any other bass out there... when I took mine out of the case, it was nothing short of perfect. All of the hardware is tight, the action was great, and very playable all the way around. The finish is superb and flawless. The luthiers at RIC obviously care about making the finest instruments around, I am convinced.

Built like a tank, and very solidly crafted.

RIC offers a five year warranty on their basses, and warranty their finishes for one year. Sounds good to me... hope I never have to use it.

I've been playing for over fifteen years and I have played quite a few basses, but the RIC is the Bomb!!! I love it, if something happened to it I would save up and get another definitely.

This was a new Ric... passive pups and neck through body. two volume , two tone, same as in the other reviews...

Killer tone... but sucky, noisy-ass pickups. This bass needed some serious sheilding, and it had a nasty ground problem. Other than that, the tone was the classic Ric sound, which is awesome. But I couldn't hang with that buzzsaw hum, so I sent it back. By the way, I tried out a 4004 CII at a local music store, and guess what... there was that stinkin' ground hum..and those were humbuckers in that model!! Go Figure. I was really disappointed, because I had always wanted a RIC, and I haven't given up on the idea, but we'll see.

Action, fit, and finish was perfect. But with the classic RIC bridge, doing any intonation setups is a royal pain in the ass. No compaints otherwise.

very solid instrument.

I didn't go through customer support on this one. If I can't get a bass that costs over a grand with cavity sheilding and no ground hum, I don't really need it. I sent it back for a refund.

BUZZZZZZZZZZZZZZZZZZZZZZZZZ....'nuff said.
I've been playing 15 yrs. and own a Fender Am. P bass... quietest bass in the world. Don't get me wrong, I know the difference between single coil and humbucker type pickups, but this bass took the cake in the hummin-its-ass-off department.

Everyone knows the 4003, don't they? Solid maple wood, neck-through-body construction, high gloss finish, bound neck and body.

I play progressive british wave, post punk kind of stuff (Radiohead, New Order, Joy Division, The Cure...). I use lot of effects (overdrive, distortion, echo, chorus, phaser). Used to play it through an old SVT, but lately I prefer the cleaner transistor amps (Trace, GK).

The bass fits perfectly for this kind of music. A distinct, highly recognizable sound, very aggressive and punchy.

This is the ultimate rock bass, a Fender or Music Man sounds lame in direct comparison. These bolt-on type make a plopp, plopp sound, whereas the Rick with its neck-through- construction has an open, ringing sound with lots of sustain. With the Fender type I used to use some kind of compressor in the signal chain. Don't need that with the Rick.

Contrary to popular believe, the Rickenbacker isn't overly bright. It is a brillant bass for sure, but has enough mids and bass also.

The bass is very versatile. You can get any sound you want: Play with fingers on the neck and turn the tone knob down for a double bass sound. With some effort you can also slapp on it (it's a little difficult, because there isn't much space underneath the strigs near the neck ). But it is best suited for strumming with a pick.

It likes a little overdrive or distortion (glued in necks or neck - through-constructions with a shorter scale can handle distortion way better then bolt-on types with a long scale).

The handling is perfect, the neck is a dream and not too flat. It's a D not unlike a Preci.

Dislikes:

Because of the bridge design, it is almost impossible to dampen the strings with your palm.

The PU's don't do justice to this fine instrument IMO. They don't transduce the whole sound spectum. I replaced teh bridge PU with an EMG Jazz Bass type and disabled the neck PU, cause I couldn't find a fitting replacement for it.

The sound is way better now. More punch and clarity, highs and lows.

Rickenbacker should rework their PU's .

Even though the PU's could be improved, I give it a 10. Sounds too good, even with the old passive PU's.

Perfect set up when I got it from the shop, never needed to change anything since then.

The workmanship is first class and can't get any better!

Look above.

Double truss rod necks are known for its reliability. I hardly need to tune the strings!

The finish looks still as if it was brand new.

Never dealt with them and don't need to.

I play since 30 years. Basically, I'm a guitar player, but for recording stuff and such I sometimes play the bass also. I had a Fender Precision and Jazz Bass, Music Man StingRay and the Rickenbacker. If I could have only one bass, I would chose the Rick without a doubt. It's hard to understand why everyone and his brother play a Fender type of bass, the Rick still has an exotic flair . I don't know, but it doesn't bother me. When I take my Rick out of it's case, everyone goes "ah" and "oh" and "wow" and "can I touch it?" My answer is always "No, you can't!". Then I ripp their heads off with the most gorgous bass sound in the world - I love it.

I bought a 2001 Midnight blue 4003, made in USA, 20 frets, 4 strings,solid top,2 volumes, 2 tones, 3 way selector switch, either pickup soloed or both on, 2 Rickenbacker pickups, single coil, passive, Maple body and neck with rosewood fingerboard, glossy finish comes with Ric case.

I play blues, rock a billy and rock n roll, I put Fender medium light guage flatwound strings on them. I play through a 70's Ampeg SVT.Iget a lot of compliments on my sound. The flatwounds keep the twang out of them with a deep, clear sound. and I can still get plenty of brightness out of them if I want it even with the flatwounds. These basses have an incredible range of sounds. You can even get a Jacoesque sound with the bridge pickup soloed.A Chris Squire sound witha pick, or a late Beatles sound with the flatwounds, Sg. Peppers, Magical Mystery tour type of sound. These basses have balls, deep and clear. You need a good amp capable of reproducing a lot of bottom for the stage, SVT's are perfect for them.

I always set up a bass when I buy one, I thinkthey may be in too much of a rush to ship them out after they set them up. I've seen a lot of them with too much of a bow in the neck, but you just tweek the trussrods and they will come right back. Their dual truss rod arrangement is much better than Fender's singletruss rod system in my opinion. Eveything else is usually great. (I've bought 5 or 6 brand new one's in my time dating back to 1977)

They will last years and years, I have a 1975 4001 which plays and sounds excellent, best andthickest finish of any manufacturer buttons are solid, once you set it the way you like it, it will stay that way unless you change to a different tension string, I always bring 2or 3 but only for variety, I would definitly use one on a gig without a backup (and have)

The company seems to be helpful, I know the music stores aren't in love with them but they've always been helpful to me. Warranty is 5 years, never had to use it.

I've been playing 36 years, own 6 other Ric's, have owned a variety of other basses especially Fenders. I would definately buy another one. I love the sound, the quality, the playability, the looks, the different colors. I don't like the fact I cannot mute the strings with my palm as on a Fender (with a pick)although I very rarely use a pick. I've played all the basses in this price range and find them far superior, even to more expensive basses, they are classics just like Ampegs and Fenders.I wish it had the pickup blend 5th knob like some of their guitars.

i bought my ric about four months ago. it's a 4 string neck through body constuction bad ass bass. I got the jet glo which is a gloss black finish with all silver hard ware. I'ts got passive pickups that soud great.

I play in a classic rock band and I think that this bass sounds good no matter what i play on it. it has a strong bass punch and a nice ringing sustain.

When I bought the bass the action was just a little high for my standards but it dont take a rocket scientist to lower the strings. the 4003 has the most unique shape and body style. it's very light to. It didn't have single scratch on it except for the case. no big deal. i uasually play through a prosessor but the ric has a distinct sound all it's own. awsome bass.

It's got the neck through body construction for extra durabillity and the plastic pic guard covering the most played area on the bass.

so far havent needed any. knock on wood.

this bass is buy far the best sounding bass i've heard. it looks pretty cool to. the cool thing is they go up in value. I priced a 1979 ric for $2500.00

Rickenbacker 4003 WHT with black hardware, made July 1999 in USA. 4-string model. Passive. Hardshell case supplied. I purchased it as new in July 2001, which means it has been stocked somewhere for 2 years.

THE Rickenbacker sound, rich in all frequencies. Not really adapted to smooth playing, but very present. Perfect for rock, fusion, metal, etc. This bass is not noisy at all. I use it only in studio, with a Johnson J-Station, a Zoom 506 and a SansAmp Bass Driver DI. Great tones.

The factory strings were not that great, but the setup was ok. No problem with the finish. Except in case of particular problems (see below), the action is low and enables fast playing. However, this bass is definitely made to be played with a pick.

I experienced a big problem. I had to travel without my bass, and while I was missing, it stayed, as usual, in its case, in a room with quite normal temperature. When I came back, the neck had incurved and so the action had become very high. A professional luthier fixed this problem, but he had to give very heavy tension to the truss rod, so that the "Rickenbacker" plate on the headstock cannot be completely screwed anymore. The RIC luthier I questioned thinks this bass is defective from the start. I am very disappointed, since this is my third Rickenbacker, and both 4001's I owned previously never caused me any trouble.

I live in Europe, and RIC warranty is not appliable there. I am currently checking with my dealer, who will do all his best to have a solution from the official distributor (exchange, repair or refund). But knowing that the official distributor is not interested in doing good job for promotion of Rickenbacker guitars, I am quite unsure I will get satisfied.

I am very disappointed because of the problem I experience. What happens to me is the worth thing possible : losing all the trust I had in my bass. I love it, but I feel bound to get rid of it. It makes me really sad. Due to warranty complications, my new bass will definitely not be a Rickenbacker.

I bought a Rickenbacker 4003 Fire-glo, brand new. Took out a loan for this baby, oh yeah. It came with a plate covering the bridge pickup but i took it off because A.) It looked too flashy and B.) Because it got in the way and to tell you the truth it does nothing. It has two jacks for you to plug it in with, standard and Ric-o-sound. Ric o sound supposedly makes it play in stereo for old rigs. Never used it, standard works just great. Neck-thru body, volume knobs for both pickups. Also, worth mentioing, it has a sting mute, which i never use, but it kinda sounds killer.

I play classic rock/indie/emo/proggresive/alternative/heavy/pretty much anything that suits me at any given moment. Let me tell you, this bass is amazing. The sound is crystal clear and it rings like a church bell. The low end is grinding and heavy, and the highs are well defined. The mid range is equally goos, and the sustain is very nice. Really no probelm with the sound unless you slap, then I'd reccomend doing it on the last fret. Also, it will pop if you play too aggresively above the neck pickup. Other than that, excellent sound. The classic RIC sound.

This is by far the easiest to play bass I've ever owned. Sliding up and down the finger board is like skating on ice if you are a figure skater. If you not, well, it's like playing table hockey. The neck is just the right length and width for me. The finish is great, it's near impossible to scratch and if it dents, the finish doesn't crack at all. When I bought it the mutes weren't working but I brought it in and they fixed it (comes with 5 year warranty, excellent). The body might hurt your forarm because it's flat kinda, but your arm will get used to it.

This bass is built like a russian bomber. You could throw it off a house and it would stay in one piece. Great for gigging. Nothing comes loose on it really, so I can't complain about anthing.

It came with a 5-year warranty. No need to hassle with customer service! Plus, they have a website where you can contact them if you need to.

Overall this is a great instrument. NOT recomended for funk, but if you're daring you can tackle some slap. Super sound, if you have the money go ahead and buy it. It won't let you down. It might take a little while for you to get used to playing it, but once you do, like those before me said, it's easy as riding a bike. In ten years I imagine myslef having a few more. In the footsteps of McCartney, Squire, Geddy Lee, and legions of others, I proudly proclaim myself carrier of the torch!

brand new from the usa. 4 string, 20 frets (i'd prefer it if there was an extra 3!). nice retro control knobs/switch fairly simple yet quite a lot of combinations available. just enough space from the bass pickup to the end of the neck for slapping (but as many reviews have stated, this is not really made for funk/slap even though i play in a chili peppers cover band!). Passive electonics (still got a great range of sounds though). neck through body blah blah blah, you've heard it all already!

my serious band is a commercial indie/rock band so the bass is perfect for the type of music, but i also play funk and metal and although it's great for all styles, funk is the one genre it really hasn't been constructed for! (especially chili's covers!). The sound is pretty sweet but i was a bit disappointed at first. after hearing bands like the jam and prog rock groups like yes and spocks beard, i was hoping to have a huge crunching treble but it never produces such a clean cut tone unless i load it with effects etc (e.g. distortion). i haven't used the rick-o-sound yet so maybe that might make a difference. it does have a pleasant original growl to it though, and it is very trebley, i guess you just need to put a little distortion to get that driving feel! haven't tested it on stage yet but it's a great bass for everything (come on it's a rick, everyone will be in awe and amazement at it's beauty when it appears on stage!). there was also the problem of the pickups being very "poppy" when i was playing finger style but i put the pickup down a bit and it seems to be ok now. i use a trace elliot 7-band range of amp, and it always produces a full/warm bass sound. i was surprised at the lack of gain the pickups produced at first but it's still a loud bass overall.

intonation was great straight from the factory and the action was quite good as well (i ended up lowering it a bit for the odd bit of furious slappage now and then). The quality of construction is superb, the bass feels expensive! the finish is beautiful (fireglo), a real eye catcher and again you can see the quality craftsmanship. pickups were fine from the factory but as i said, once the action was lowered i had to put the pickups down a bit because the bass was so poppy. the saddle, tuning pegs, everything was excellent, very impressed.

the bass is strong as hell with the duel truss rod system and neck through body. i would cry if the finish was scratched, but i think the bass will stay sturdy for many years to come! finish seems to be good should last a long time if polished/cleaned frequently. the strap buttons were pretty unreliable, but i've put on strap locks now so the bass should be pretty "fall down" free. i would definetly use it without a back up, i'm quite confident in the bass itself, due to it's excellent construction.

i've been playing for around about 4/5 years and for the most part i've been using a battered up old yamaha RBX460. I can play any style/technique on the bass and i like to push my skills to the max sometimes, but i didn't want to get a boring sessiony kind of bass, i wanted something different. The rick is a beautiful bass with a quality feel and a unique sound (providing you've got a decent amp!), and with a few more months playing it, i should fall in love with it completely (totally different feel to the yamaha). I still manage to play funk with it and despite what some people say, you can slap on it, and it produces its own punchy/warm slap sound (even though it's not made for it as i've said many times before). The thing with the rick is that it has so much more character and personality than say a musicman or warick (both great bass manufacturers in their own right), and it's much more likely to draw attention than any other bass on stage. It may not be made for session musicians but in the end, i'm not a session bassist. my goal is to show people what the bass can do and make the instrument ever more popular :-)

My 4003 is pretty standard (if such a thing is possible for a Ric!) - large bridge, pickupcover etc etc. Fireglow finish, passive stereo output:if your're reading about htis bass, you know the form!Standard Ric case - damn it's heavy, but we don't want it damaged. Nice polishing cloth, too.

The sound of this bass is the voice of God - resonant, deep, clear tones, and for my money, very versitile. The range of different sounds available is very wide - just fiddle with that pickup switch and the vol/tone controls and you'll expose the wide pallete of sounds. I'm, supprised that the 4003 has a rep for being trebley, its clear and punchy, sure, but there's plenty of bass to compensate. I run a 2x12 cab off a Carlsbro 15" combo (not the best rig in the world) and it sounds so cool i don't want to stop playing. Havn't used the stereo output so i can't comment on that feature.

The bass came set up almost perfectly - good action, intonation well set. The pickups need slight hieght adjustment, a 2 minute job. The finish - flawless Fireglow, exposing the lovely grain of the wood front and back. Perfect slimline white neck and body binding, no scratches which pleased me - it was a display model. Slight powdery marks were either side of the neck just where it joined the body, these just wiped off with the Ric cloth provided. I just love to open its case and admire it! How sad is that?......

Havn't used it live yet, but eveything about this bass screams "(very well) built to last". I'm going to replace the strap buttons with lockers, just to be on the safe side.

Never dealt with Rickenbacker - it came with a one year warranty, but no 5 year reply card that American reviewers all mention. Is this optioon not open to European players? If anyone knows, can the e-mail me and enlighten me please? Cheers!

Ive been playing bass for almost ten years, and my first bass was an old homemade Ric replica. Consequently, my aim has been to own one, but i never thought i would. When I went into the shop, I was going to buy a Mex Fender Jazz - it felt O.k. and i was about to do the deal when, expressing my admiration for the 4003 on display, the sales chap offered to let me have a go. An epiphany! This bass was "The One" - it felt so natural, really well weighted, sounded lush and generally felt as though i'd owened it forever. Noel Redding has said that if it doen't feel like it's "the one", don't buy it. Sound advice - despite the massive dent in my credit card! After I left the shop I was in genuine shock at what I'd done, and only know is it sinking in - I own a Ric!! Try one - you'll know right away whether it's you.

I'm sure if you know anything about basses you'll know about Rickenbackers.It's the essential retro bass.Used by the likes of Paul McCartney,Chris Squire,Lemmy and hundreds of other bassists who want a cool looking, cool sounding, cool playing bass.20 frets, 4 strings(I use D.R.'s),solid maple body,thru neck,2 single coil pickups(DiMarzio make replacements),nifty string damper in the bridge unit,very antique bakelite nut,"shark fin" inlays,passive with volume and tone controls and pickup selectors, stereo output.The neck has been compared by a few of my former guitarists to a Jackson Randy Rhoads-but wider.LOADS of chrome!!!

Very distinct sounding bass.Reasonably wide range of tones available with some very double bass sounds on the neck pickup.I use loads of effects with my Ricky and because of the clarity of the pickups combined with the strings I use the effects always come across clearly.....so no problems there.I prefer to use my Musicman at home or in the studio but when you crank up the volume and play live the bass really shines.It sounds awesome for punky stuff especially through a valve amp (listen to any Hives CD and you'll see what I mean)

The guitar was set up pretty poorly when I bought the guitar.I gave the guitar to a friend of mine, and although an amateur , he set up the Ricky well.The action was just how I like it(as low as possible).The pickups were high enough to get a good signal from the strings but low enough to avoid hitting them during frantic playing.I don't know if the paint had a flaw in it but although the very attractive metallic midnight blue was supposed to be solid,the grain of the maple body shows through.It looks cool, even if it is a flaw.The tuners havent given a single bit of trouble and all the electrics are like new-no buzzing or grinding.All in all a very well made but poorly set up bass.

If this is a good measure of the durability or reliability or the Rickenbacker then so be it-I haven't tuned the bass in for 4 months and its still in tune.I play it numerous times a week,it's been in temperatures of minus 10 degrees and plus 25 but still stays in tune.No matter how hard I try it won't go out of tune.The lacquer on the back of the neck came off but it was propped up against the serrated metal front of my amp so it was my fault really.The twin truss rod neck has'nt needed adjusting but I have got the same gauge strings that Rickenbacker recommend.

Dunno never tried to get anything from Rickenbacker

Love it.Unrivalled.Irreplacable,cool,chic,everyone loves its looks,sounds great.Thats it really

Stock 1995 Jetglo 4003. You've probably already read about the features, but to summarize: neck-through construction, two passive single coil pickups, two volume and two tone controls (one set for each pickup), three-position pickup selector switch, stereo output (to power two amps simaltaneously), maple neck and solid maple body, bound body and fingerboard, rosewood fingerboard with "shark fin" inlays and clear polyurethane finish, unique dual truss rod configuration, 20 frets, Schaller Deluxe tuners. Comes with a hardshell case made for Rickenbacker by SKB, a RIC polish cloth, allen wrench, and manual.

The 4000 series bass was extremely innovative when it was introduced in the 50's and thankfully, Rickenbacker has made only minor changes to the original design. In an industry that is inundated with copycats, this is truly a one-of-a-kind bass. It has everything you need on an electric bass without useless bells and whistles. I give RIC a 9 for pioneering one of the few truly classic designs and for not subsequently ruining it by jumping on the bandwagon and turning it into yet another Fender Jazz ripoff with active electronics.

This is by far the most important feature of any musical instrument and this is where Rickenbackers truly excell. The neck-through design that RIC pioneered give their basses unmatched clarity and sustain. This is now my main bass. Probably the main reason I switched to a Ric is that I got tired of not being able to hear what I was playing. This bass cuts through the wall of mush in my
four-piece band with rich definition throughout the range of the instrument. Not only can you hear it, but what you are hearing is heavenly! The notes have that distinctive Rickenbacker twang that is unmistakable. It's very warm sounding, but bright at the same time. By playing with the knobs you can alter the tone quite a bit, but it always sounds like a Ric. Either you love that sound or you don't. Rics have a reputation for being very trebly and some people will tell you they lack low-end. Don't believe this!! Just because Chris Squire boosted the highs on his Ric doesn't mean that they always sound that way. Rickenbacker modified the pickups when they introduced the 4003 and this bass can produce lows on par with any other model. In fact, due to the clarity of the notes, I can dial in more generous lows with my 4003 than other basses without it sounding muddy. I'm in an eclectic jamband and we play a variety of styles - rock, funk, jazz, bluegrass - and this bass sounds right at home in virtually any context. The guys in my band love it too and I've received lots of compliments on my sound from others. I even slap on it occasionaly and it sounds every bit as percussive and twangy as my Fender Jazz!

I bought this bass used, but it was mint when I got it. I'm not sure how much it was tweaked before I got my hands on it, but I can't find a damn thing to complain about. The action is low without ANY buzzing. The intonation is perfect. This bass never goes out of tune. I'll play a gig with it, sweating all over it for two sets, then come to band practice a week later and it's still in tune! The hardware is totally solid. The finish is beautiful and seems really resistant to scratching. The bass looked unplayed when I got it and it was six years old at that point.

My one complaint here is that the strap buttons come loose regularly. It's not a big deal, all I do is screw them in a couple of turns when I'm done playing. This is a common problem due to the weight of the instrument and it's been an issue with the other two basses I currently own as well. Eventually I'll do what I did to the others and glue pieces of a dowel into the holes and re-insert the screws.

I've only gigged with it a couple of times, but it's been standing up great to the thrashing it gets twice a week at our marathon rehearsals. The hardware is heavy, solid, and straightforward. The body is a solid slab of maple and it's a neck-through. It's passive, so there isn't much that could go wrong with the electronics unless something somehow came unsoldered inside. I can't anticipate having any problems with it. I don't use a backup. If I felt like I needed one, than I simply wouldn't play this bass. If I break a string, then it's time for a drum solo!

Never needed it, doubt I will. When purchased new, it comes with a five year warranty.

I've been playing bass for 12 years. I also currently own a Fender American Standard Jazz and a G&L L-2000. I have owned the following basses: an Alembic Spoiler, an Ernie Ball Stingray, a Fender Precision, an Ibanez RoadStarr II, a Washburn six-string bass, and a Kramer Ferrington acoustic bass guitar. All three of my current basses are great in their own ways (that's why I still own them), but my Ric is easily my favorite. I've gone through a lot of basses searching for the right one and wasted a lot of money in the process, but I feel that I've finally found my voice with this 4003. I will keep this bass for the rest of my life and if something happened to it, I'd go right back out and buy another one.

If you've read this far, you know that I love this bass and you know why. In the interest of full disclosure, I'll share the downsides of this bass. First, it has required a significant modification of my right hand technique. Many Ric players play with a pick, so this wouldn't be an issue for them, but I don't. Ric basses come with a hand rest over the bridge pickup. Like most owners, I removed mine (which was a bit of an inconvenience in itself.) The bridge pickup sits in a wide cavity in the body of the bass. When I tried to position my hand on the pickup as I do when playing my other basses, I ended up with a nasty cut in my thumb where it was rubbed raw by the metal plate around the bridge pickup cavity. I've since learned to play with my thumb anchored just in front of this metal plate against the screw that fastens it to the body. It took some time to get comfortable playing with my hand in this location, but now it feels natural.

Second, the edge of the binding on the body rubs against my forearm and can become uncomfortable after a prolonged playing session. Again, it's something that I have become used to, but it bothered me sometimes initally.

Every bass has pros and cons and this one is no different. The exquisite sound of this bass makes the adjustments I've had to make in my technique seem like paltry sacrifices. Still if you've never played a Ric before, you should probably try to play one a bit before you plunk down your cash.

For the time being, I play through a GK 400RB into an SWR Workingman's 4X10T or through a Nemesis NC-210 combo amp. However, I am currently assembling a rack that will include an Ampeg SVT-3 Pro and a dbx compressor and will soon upgrade to an Eden D-410T cabinet. When I plug my Ric into this system I'm expecting some serious magic!

I'm a hardcore Rickenbacker fan, and the day my stock mapleglo 4003 was delivered produced a big adrenaline rush. Everything about this bass is first-class. The maple grain, though relatively conservative, was gorgeous. The front body binding was great, and the fret job was nice, though the side filing could've been a bit better. The lacquer finish was flawless. This bass was ordered with standard chrome hardware and white trim. The serial number on the jackplate indicates a production date of November, 1992.

The neck is the classic slim Rickenbacker style-- very easy on the hand, and very easy to play. Binding on each side of the neck, and those beautiful sharkfin inlays on the fretboard. Great action and set-up straight out of the factory; I've never had to make any kind of adjustment. This bass is incredibly low maintenance. The pickups/electronics are stock Rickenbacker passive, with individual volume and tone controls and 3-way pickup selector switch. The body and headstock styling have the instantly noticeable and recognizable "cresting wave", which makes it my favorite over any other brand of bass ever made. The design is classic and timeless, and I hope Rickenbacker never changes it.

I'm rating this bass a 9 for features, only because of passive pickups. But that's what I want anyway; I HATE active electronics on any kind of bass or guitar except for the Zeta Crossover (which is another review.) Rickenbacker bass pickups have always had the reputation of having a high output. With a high quality rig, this eliminates the need some players might feel for active electronics. It has all the features you would expect or need for a passive pickup bass.

As most bass players know, a Rickenbacker has a unique tone that is different from any other. It doesn't have the most versatile tone around, and certainly it's not for everyone. But you know a Ric when you hear it, and that's what I wanted.

However, there is a secret to making the 4003 more versatile in tone: a premium set of Pyramid Gold flat-wound strings. When the factory installed round-wounds (which I hated) finally gave out, I replaced them with a set of the Pyramid Golds. Be forewarned that these strings are pretty expensive, but they are the BEST I've ever played. They give my Ric a much warmer sound with the tone controls all the way flat. The Pyramids are made of a special silver and nickel alloy, and have a glassy smooth feel. (These would also be ideal for any fretless.)

Anyway, a high quality set of flat-wounds make my Ric more acceptable in a situation that calls for the classic Fender Precision or Jazz tone. You'll never fully capture a Fender tone with a 4003, but you can get reasonably close with the aforementioned flat-wound strings, the tone controls dead flat, and a quality rig. By the way, my rig now consists of a Walter Woods Super High power solid state amp, and a 4 ohm Euphonic Audio VL-210 cabinet (which is, sadly, now discontinued.) This rig is absolutely unbeatable.

My 4003 works equally well in the studio, or live gigs.

I've covered most of this in the earlier features section. About the only thing I can add is that bass is top quality in every aspect. My only complaint (a very minor one at that) is that the fret job could've been a little more professional; but nothing about this bass has ever given me any problem in the 9 nine years I've had it. The action is quick and just right; it has never required any adjustment. If it ever did, the double truss rod system would make it easy.

The hardware is first-rate. I replace the strap buttons, but only because I wanted straplocks. The finish is nitrocellulose lacquer and no doubt will check or wear off eventually; but I take damn good care of my basses and equipment and, so far, there's absolutely no evidence of checking or wear.

This bass has proven it's dependability and I would not hesitate to take it to a gig without a backup. I've done it many times with no worries whatsoever.

Ric basses have a 5-year factory warranty (but be sure to fill out and send in that warranty/ownership card!) I've never had any problems with my 4003, but I've talked personally with the folks at Rickenbacker several times and they seem like good people. If a problem ever should come up, I'm certain they would be professional and easy to deal with.

Friends, this is a great bass at a great price. Extremely easy to play; quality materials and construction; simply the best bass overall that I've ever owned or played. Let me repeat: it's not for everyone. If you HAVE to have that classic Fender tone, and nothing else will do, then this bass isn't for you. Same if you're a slave to active electronics-- look elsewhere. But if you're tired of that classic Fender tone, or these new-fangled, flashy basses with a million bells and whistles and little substance tone-wise, then a Rickenbacker 4003 just might be what you're looking for. As far as I know, it doesn't cost a penny to test-drive one. You just might surprise yourself.

By the way, I own a vintage '66 Fender Precision that I've had for 30 years, and I also own a Zeta Crossover. I consider my Ric 4003 to be my Number 1 instrument. I would be greatly surprised if another bass came along to knock it out of #1. If mine was ever lost or stolen, I'd get another just like it ASAP.

My Rick was made in February 1986 and purchased a year later. It has the black body (ala Geddy Lee) with the stereo setup. I play it into a Rickenbacker Road amp to take advantage of the stereo setup.

You could plug in a hundred basses in a music store the size of a Wal-Mart, and you would hear a Rick stick out of the crowd. It may be limited in its sound, but no one can question the quality involved in the construction of this guitar, and the distinctive sound it produces. I have yet to hear a guitar, keyboard, or set of drums that can cover my bass.

I have done nothing to this bass in 14 years. It never has needed anything. There were absolutely no flaws in its construction. I can fly up and down the neck with ease with my long fingers, and anyone with short fingers can easily do the same.

The body and neck give the illusion of fragility, especially compared to a Fender "monolith". However, my bass has been from Texas to California to Montana and back to Texas, and has withstood all climate changes with no adjustment.

I've never had any problems with it.

I am a multi-instrumentalist (guitar, bass, saxophone) and I bought this bass just to have one. I haven't toured the music stores in years, and when I did, I couldn't believe the price has almost doubled! I definitely plan to hold on to mine!

1976 jetglo 4 string/ standard pickups and everything else

When I first got it I was into 'Chris Squire' so it worked good for his sound. Was good for Wings material too. I never cared for it when it came to R&B or country. I used ampeg amps with it for about 5 years then ran it thru a Peavy. Now I have GK and Carvin Amps to use for my basses. I never got much noise using it but not much bottom either. If you use a pick it sounds too clicky. Very mid range sound.

The neck is nice and fast and action is low. I had trouble with truss rods during the first two years I owned it. It's dual rod neck kept needing adjustment and one rod stripped out of the threads. I had to get major work done. Finish and fret work are good and hardware is expensive looking.

I used this a lot in the late 70's and it always came on and played consistently. I say it is reliable except for the trouble I mentioned about the truss rods. finish held up in extreme conditions.

I was happy to trade this last month for a 1960 Fender P bass in good condition. I've enjoyed owning the Ric but I wanted the Fender more.I have been playing since 1974 and have been in 16 bands. I don't think I'll own another Ric bass again.

4003 'jetglo'. I would have to say that the Ric bass features are "well-documented" to say the least. I will have to be a bit anecdotal in order to retain originality and justify my review (yes, I am going to gloat over my purchase...). I've heard Geddy Lee mention that he despises the unusual Ric bridge and that he replaced it; Chris Squire heavily filed his 4001 body; an acquaintance of mine removed the neck laminate (!); numerous reviewers insist on taking the chrome cover off; one harmony-central reviewer even replaced the pick-ups with Duncans! Be original...leave your Ric alone. Mine is complete with the big-n-nasty bridge, the unnecessary chrome cover, the original pick-ups and, yes, even the sleek fretboard laminate. purchased as a demo for a slight discount, minor scratches in the black finish on the back (belts, no doubt). This bass is a classic and needs no rating for this category; low-tech; no battery (passive); unbelievable high-end neck access; did I mention the ugly and obstructive chrome cover? ok, wait, maybe there is creative potential in limitation - you have an either/or option for right hand/pick position - behind for treble and before for bass. Not to mention the fact that the guard helps those who typically thump right above the pick-up to remember that this playing position is going to increase your pick-up noise/"click". In short, leave the cover on....

The proverbial "Ric" sound really exists and is not a mythical/psychological construct! As opposed to any other bass I have ever played, I prefer the bridge pick-up to the neck pick-up. The almost indescribable (other than to say "Ric") trademark growl/punch/sustain/ring comes from (mainly) that single coil bridge pick-up. The praises are usually sung to the Ric high-end tone, but in truth this is a mid-range heavy bass. If there are complaints about the low-end on the 4003 and the 4001 (c.f. Geddy Lee, et al.), I would try to understand that as a subjective "stylistic" judgment rather than an unequivocal condemnation of the bass's low-end capabilities. The fact is, the low end on the Ric bass seems intentionally contoured, I don't want to say attenuated, but certainly "rounded", not as punch-heavy as the mid range. It goes without saying that the upper registers are clear as a bell. The bridge pick-up is high-output but has ABSOLUTELY clean, crystal, piano-like tone. Another possibility is to use both neck and bridge and pick behind the chrome guard to keep the punchy treble in play. My rig consists of two peavey cabs, a 410 and a 115 and the ampeg B2R. Ideally, I would like to replace the B2R w/ the SVT3-pro, but the sound suffices (see my B2R review for more details).

Being a wall-demo in the store itself, the set-up was initially lacking - the action was a foot high. The tech in the store performed a quick truss rod adjustment and the bass has been restored to playable condition. Soon enough I will replace the factory strings with Rotosounds and have it set-up as such. minor fret buzz in the middle of the neck; I suspect a full set-up will take care of the extra string noise.

Heavy duty; seems/is extraordinarily well-made. The jury is still out on the finish. The back of the neck tends to "stick" after long durations of playing, something to do with the combination of the finish laminate and perspiration/moisture. Jet-black is a scratching liablility; not necessarily bad, just a universal truth...(watch your belts!) Please do not understand this as an endorsement of finish/laminate removal from the Ric.

No idea, relatively new instrument. Incidentally, I have seen a Rickenbacker web FAQ in question and answer format with Ric's CEO responding to a good portion of the questions. He certainly seems knowledgeable, helpful and passionate about his American-made product...just that relatively small level of involvement gives me a happy feeling from the manufacturers.

Where does one go from the Ric? I have a Jazz-deluxe (Fender, ahem, mexican made); no contest. The jazz is thinner, no guts, very little personality when matched against the Ric, although it has a great unfinished maple neck (ahem, bolted-on neck). I also own a Dean Rhapsody fretless, great for what it is (I got lucky and had a really good set-up from Dean) and is highly usable in non-Ric scenarios (How was that?). What else is there to say?

I bought a brand new 2001 4003 mapleglow from AMS recently, the first bass I have ever purchased even though I have "played" bass for a long time (mostly on other people's basses). As to be expected, the bass conforms beautifully to the player, and I for one love the pickup guard that slappers hate because it gives me something to rest my pinky and 4th finger against when I'm using my index and middle fingers. The only, only, only complaint I have which is in part due to my body chemistry, is that I sweat a lot when I play (I play in a farily high energy pop-rock band), and when my left hand gets clammy, the finish of the neck and the wetness of my hand cause more than usual friction, but I have learned to deal with it (or play with less extraneous voracity) and the included wiping cloth has come in extremely handy.

Oh my god, the sound, the sound! I play through a '68 fender bassman rig with a double 15 fender cabinet and also use a SansAmp bassdriver DI for the board. The sound is simply lush, it's not too low, it's not too high, it's not too loud, nor to dry... there is something about that rickenbacker punch in the bass that is just unmatched by anything... I had to readjust some of my playing style to get used to the silky action, but when amplified, quietly plucked notes can really cut through due to the inertia of that famous rickenbacker ring... It's funny, because I usually perfer older gear, but I tried about 10 used Ricks and couldn't find an -as dynamically responsive bass- as the one I own -- although, I've found that pulling back (volume wise) on the pickup closest to the neck actually makes the ouput louder and fuller. This took me a while to figure out. Also, the rick sounds good with a medium guitar pick (oddly)- I never would have even considered playing a bass with a lighter pick but it happened by accident tonight actually, and it actually meshed well dynamically with this song which could be called dense.

Before getting the Rick, I was playing a Kay bass from the 60's which, although it had some charming tendencies, is vintage like old spaceships don't exactly appreciate with modern use... I was used to very high action, so I had an extremely heavy playing style to match -- which, when transfered to the Rick, sounded like I was playing crotales with a sledghammer. When I found an appropriate volume on my amp, I realized I didn't have to beat the hell out of the rick to get it to make a pretty sound, and hence, I learned to appreciate its slightly lower action. The instrument was totally setup exactly as I would have wanted it right out of the case, I still have the factory rick strings on it (after 4 months) and they still sound fantastic. And of course, regarding the finish, I sweat all over it -- I feel bad because it's so beautiful, I just hope this doesn't cause problems in the long run.

The one thing I have to say I really love about the Rick is that it stays in tune for days and days, even after rigorous playing and pretty extreme bending of strings. It does this without being strung like Ulysses's bow -- the strings feel fairly loose when tuned, hence the lower action -- but amidst the looseness, it stays in tune, without those cheesy lock nuts that are used on heavy metal guitars. Becuase it has the feeling of being built like a tank, it's relaxing at shows because you know it will be able to stand up to the elements of strange bars or weird outdoor venues.

I feel converted -- I have played bass off and on as my standard rock and roll instrument of choice for about 12 years now. I had played a couple of Fenders before -- Fender Jazz's and a few precisions, I had played a hibrid Kramer bass, a Kay... The rick is probably the nicest instrument I have ever purchased -- there is a real sense of top of the line quality, versitility and passion in this bass, and it was new too!

4-string Rickenbacker 4003 Bass, white w/black hardware, manufactured July 99, purchased as new in July 2001 (this probably means that it remained 2 years in the importer's stocks). Comes with hard case.

The finish is perfect, after all these years (this is my third Ric bass) Rickenbacker's attention to make perfect instruments is still the same.

Standard strings are Rickenbacker 45-105, and the neck is nicely set with the strings.

4003's have two truss rods to reinforce the neck if you play heavy gauge strings.

I have no amp, since I only play in my home studio. But I have a Zoom 506 effect pedal, and even with this low priced effect, the Rickenbacker sounds great. Both bass and treble pickups have a huge dynamic. Absolutely no noise is heard from the bass.

The 4 pots (volume and tone for each pickup) allow a very wide range of sounds.

The standard action, as the bass is set-up from the factory, is perfect. The whole finish of the bass is excellent.

Can't say anything, since I just purchased this bass. All I can say is that I owned two 4001's before, and I never experienced any reliability problem.

No opinion.

I am the happiest man in the world to have a Rickenbacker bass again. This time, I promise I'll never sell it.

Beautiful beautiful sound.

There are those here who say that a Rick isn't good for slapping, but I have to disagree. Slap right on the 20th fret and you can get some thick chiming sounds.

Manufactured in December of 2000 at Rickenbacker's Los Angeles factory. There are 18 other reviews of what this bass features, so I'll spare you. I love the foam string mute. It also comes with a really nice case.

I play 60s and 70s rock (Beatles, Stones, Hendrix, Cream, etc...) and I've owned and played a lot of basses, and I can honestly say that for the type of music I play, there is absolutely no better bass. For all of the complaints about the pickups humming (they're single coil), the axe that I got is nearly silent when sitting still. It is very versatile as far as the sounds it produces, and will play equally well on stage. I've never recorded, so I can't say for sure.

Right out of the box, the bass was perfectly intonated and the action was perfect (for me), not too high and not too low. It's a brand new bass, so it was in perfect condition. The wood was excellent, with only a couple of blemishes, that I actually think add character to the bass. Fireglo is definitely my style.

This bass is build like a Sherman tank. I think anyone who's ever played a Rick will attest to this. If you've ever noticed how many 20 to 30 year old Ricks that have had the crap kicked out of them but are still in perfect playing condition and sound sweet, then you'll agree. American made all the way. My only complaint is that the strap buttons could be a little bigger. And yes, I'd definitely play without a backup.

Haven't had to deal with Rickenbacker yet.

I've been playing for about 3 years at this point and own a bunch of basses, including a 1976 Univox Stereo Bass, which is a 4001 copy. Out of all of my instruments, this is definitely the one I reach for. If I lost it, or if it were stolen, I'd definitely buy another. Hell, I may buy a 4001 at some point in the future regardless.

feb. 2001 made in america. 21 frets 4 string

sounds good playing a variety of rock and roll tunes. it has 2 tone and bass controls for each pick up.you can play songs from a high treble "play that funky music white boy" to a deep "black sabbath" groan

i got this bass still in the shipping box from a local guitar shop direct from Rickenbacker.i took it out and was ready to play. i didnt even have to tune it. the action was is so sweet.nothing at all wrong with this bass.

this bass will last a life time. everything is perfect on it.

i have emailed customer service with a few questions and they reply imediately

i have been playing off and on for nearly 20 years. mostly for my own enjoyment. my first bass was a `68 p bass. it wont EVER get lost. but if it is ever stolen i pitty the fool.i love the treble with the constant deep punch of the bass pickups. i dont hate anything about this bass.i tried everything out there to be sure i just wasnt partcial to ric`s. from bc rich to gibson to obviously fender. ( i wish i knew what happened to fender, even the american made ones, they all sucked)

Maple neck-through. 2 single coil passive p/u's. Midnight Blue (Almost Purple), with black binding. Inlays on neck.

What else can I say, it's a Rick. I bought it used, and it had really, really, really old rusted/dirty round wounds. I loved the sound, but when I went to tune them after I cleaned a little of the gunk off, one of the strings broke. I know all true Rick fans will hate me for this one, (but try it before you curse me), I strung it with flat wounds. It has the best "Thump" of all my basses.

The neck is great. The action is really nice and low. You have to get a little use to it, but after that, it plays like a dream. I had to take the plastic guard off the bridge pick-up. Its just a lot easier to play that way.

I've only had it for 3 months now, but as I said, I bought it used and it looked like it went through a little "Stage Rage". A few dents, paint scrapes, things like that, and it still plays and sounds great.

I've never had to deal with them, but some friends of mine said they were great. So, I'll put a good word in for them.

I love this bass. I am running it through an Ampeg SVP-II Pro pre-amp. From there, into a Carvin XC-3000 crossover, into an Alesis 3630 Compressor. From the high end, I go to a Carvin XP2 processor then into the amp. From the low end, I go straight to the amp, a DCM1000, 1000 watt power amp. I am running that into a Carvin RL-210T 2X10 cab and a Carvin RL-115 1X15 cab. That way the high end has the effect, but the low end stayed nice and clean. Its a bit of a set-up, but it sounds fantastic.

I own 3 Ric basses, and want more. The one I'm reviewing here was born in May of 1995, at Ric's skunkworks in CA. I'm the original owner. It's a standard 4003. This one's jetglo (black) with white binding and plastics, chrome hardware. 20 frets (very nicely finished and crowned from the factory), rosewood fretboard (with pearloid trapezoidal "shark fin" position inlays) which is laquered, 4-string with non-locking Kluson style reverse-wound tuners, large tailpiece but with a two-point floating bridge (Rics are So strange!), thinline solid body maple with maple 1-piece neck-through-body and dual truss rods, 2x Ric "button" pasive but very high gain/output single coil pickups, 3-way selector switch, vol and tone for each pickup (arranged "upside-down", with volume below tone), stereo output (though I only play it in mono). Go to www.rickenbacker.com/ to check out their instruments.

A Ric neck is very similar to a Fender P-bass in width at nut, but they are narrower at the heel (and with a much more sculpted heel) and are "flatter" top to bottom. But if you've played a P-bass, a Ric will feel familiar. Similar in tone and balance, with more wood and growl than, a Jazz Bass.

Came in a hardshell molded plastic case (black interior, with very little storage space), polishing cloth, instruction manual, and case lock key. This is a VERY secure case, and much improved over the Ric bass cases up to the early '80s.

I give Rics a '9' on features. Everything you need but no gizmos. Changing strings is a snap (not through-body stiging) but because they have a floatin bridge, don't remove all the strings at once (it's also hard on your guitar's neck to remove them all). It is not possible to set each string height individually - the entire floating bridge adjusts on 2 screws - but the bridge is rounded to match the fretboard radius. It seems that a Ric wouldn't have all that much sustain, because of the floating bridge, but they have sustain for DAYS, and lots of punch.

Rics can suit almost any style. Notice I said "almost". I'll begin with what they *don't* do well.

They are a hard and brittle bass in construction, and this means they are not fogiving of any misfrets. Also, they are inherently noisy (clicky) when played hard, as the strings tend to hit the 20th fret. On a Fender, this yields a great "chiming"/popping tone but an a Ric it is just plain an annoying click/clank. My advice is to remove the bridge pickup plastic chrome cover (cosmetic only) so that you can finger pick over the breidge pickup, so as to lesson the string play and the "clicking". Rickenbacker basses are not usually considered snap-and-pop funk basses. Where a J-bass (even a P-bass) yields a great tone when slapped, a Ric just balks. Some people might have the touch for this to work on a Ric - I certainly don't. But that's not what Rics sound great at anyway. The "button" single coild pickups have WAY more output than a Jazz Bass, so be prepared for some noise and for LOTS of noise if you are under neon signs. Also, when finger picked, the neck pickup can be (and often IS) muddy with a capitol MUD. If not EQd properly, Rics can be extremely BOOMy. They are NOT a bass for the beginner, nor are they for everybody. And they are certainly not a "do it all" instrument.

There, I hope I scared some of you away from betting a Ric so that I can own more!

What they do EXTREMELY well: When EQ'd properly (scooped, cut some bass - they have plenty of that) a Rickenbacker sounds like NOTHING else. This is a good thing - no, a great thing! AUTHORITATIVE tone. More growl and wood than a Jazz, more sustain and honey than a Precision. Full and bright tone. Very versatile. There's a huge tonal palette with those 2 single coils. Unbelieveable sustain! They have also got to be THE fastest, easiest to play necks on the planet. With the neck-through and all maple construction they give a LOT of punch and ringing attack, great tonal definition. And it sounds GREAT, whatever style I'm playing (except funk/slap).

I play or have played (studio and/or gig): country-western, classic (50s - 80s) rock, Beatles covers, Irish pub music, indie art rock, jazz. At all these, my Rics excel.

My current rig is the Ric through an Ashdown ABM-500 "bass magnifier" and into a David Eden 410XLT cabinet (no effects). OK, I get to brag here: IT SOUNDS LIKE GOD.

Factory set-up was very good. Rickenbacker does the best job in the production guitar business, better than most boutiques, at the 3 F's: fit, finish, and fretwork. Rickenbacker basses can acheive incredibly low action, and I have a very light touch so I have mine pretty darned low. I run GHS Boomer 40-95s (lights) on it. There were NO FLAWS of ANY KIND. Incredible!

Unlike on my Fenders, I do not attempt to do my own set-ups on my Rics. That dual truss rod thing is just too bizarre, and too easy to screw up. But when they are RIGHT, there is NOTHING better.

This is THE guitar I grab when going to play live. It is my 1st choice, period. It can be a bit noisy in the studio (single coil hum) but it has a tone that makes you sit up and take notice. I've played Ric basses (as well as Fenders, and others) for 20 years and have had NO PROBLEMS of ANY KIND with ANY Rickenbacker instrument. ROCK SOLID. Stays in tune. Keeps a set-up. ABSOLUTELY DEPENDABLE. Unless I have a reason to gig with a 2nd instrument (a Fender for some tunes) I don't carry a backup. In 20 years of playing I've never needed a backup for a Ric. I've had P-bass and J-bass pickups go dead, had tuners fail, had pots die - but never on any Rickenbacker.

I have good gear, and I take pretty good care of it. I play live quite a bit, and have to rely on my gear. Stuff happens. But I've never had ANY problems with ANY RIC.

Rics have very small strap buttons. I recommend strap locks. I don't use them, but I'm very easy on my instruments and don't jump around. But I have knocked my basses off the buttons before (thank goodness I caught them!).

The finish is bullet-proof(+). It's been in every kind of meteorological condition, played and sweated on for hours at a time, often 4 days a week. I change strings, and sometimes I even wipe it down. I've NEVER polished it. It still looks absolutely brand new. It's still absolutely rock-solid.

+ Word of warning: do NOT put anything with chlorine (either to clean or to hold the instrument) near your Ric's finish! I've never done it, but I've seen it on other instruments. OUCH! Melts it.

I've had pleasurable experiences with Rickenbacker, the 3 times I have contacted them. But that was DECADES ago. I've sent off 2 letters (asking for serial number information) and called once (regarding vintage instruments). They returned my letters promptly - and they weren't form letters. The person I spoke to on the phone (after a 10 second wait) was nice and friendly and helpful (they don't sell or track vintage instruments - sorry). But that was so many years ago I can't justify an opinion.

It should speak well that in 20 years, total, of owning and playing Rickenbacker basses, I have NEVER had to contact them about ANY kind of problem!

I can't remember exactly what I paid (I think it was around $800) but whatever the price it's been worth every penny. This is my favorite tool. It plays instinctively. The scale is different than a Fender and plays much "tighter" and easier, with a lighter touch needed.

I've been a bass player for 20 years. I own other Rics (3), plus Fender basses (4), Yamaha (1) and Hofner (1). They all have been gigged and recorded with. But this 4003/JG is by far my favorite, 1st choice instrument. This 4003 is better than my other 4003/S, but actually is NOT as good a bass as my '86 4001! But this is the one I grab on instinct most every time I head out the door. It feels, fits, looks, plays and sounds PERFECT.

If it were lost/stolen/destroyed I'd cry. I have other Rics to play, but I'd start looking right away for a replacement 4003 or 4001/V63. This one is a GREAT bass. It plays itself, sounds fantastic, is versatile, is absolutely reliable, and still looks new after 6 years. If that's not perfect, I don't know what is.

If you are in the market for a bass guitar, I'm not recommending you just go out and buy a Ric. Read my "Features" and "Sound" sections of this report. They are NOT for everybody and if you are heavy-handed they will balk and sound like crap. But, please do check them (4003, 4001/V63) out for the TONE, the fit and finish and quality of construction and attention to detail. They are individually made, so each one feels different from another - so try out a few. And then remember that these are production instruments! Ric constructs and finishes about 12 instruments at a time - and the attention to detail and pride shows. Try one out, and see what you think. Fellow bassists that I've asked to try out Rics scoffed at first - until they picked one up and played it. Then they have nothing but good things to say, even if it's not the bass for them. I play other basses and Rics are my favorite.

Created in California (as are all Ricks) in May of 1995, jetglo (black) with white binding and chrome hardware, trapezoidal fret inlays, stereo (Rick-O-Sound, never used) or mono output, 4-sring, VERY solid body (all maple with rosewood fretboard), 21 medium frets, Kluson-style reverse-wound tuners, 2 single-coils with 3-position toggle switch, volume and tone pot for each pickup (upside-down: volumes are the lower knobs).

It's a stock, black 4001 - if you don't know the features or what it looks like, visit www.rickenbacker.com.

I purchased it new, but cannot remember what I paid for it. Came with a molded case and polishing cloth. Whatever I paid, it's been worth every penny and then some.

I give it a 9 for features not because it has every bell and whistle ever invented for a bass, but because I can't think of a way of making it better except possibly for it to have J-bass controls (vol/vol/tone). Also because the instructions for filling out a review say "Superficial, glowing reviews will not be published." This review is glowing, but it is NOT superficial.

I own 3 Ric basses (this 4003JG, a 4001MB and a 4003S/MG - plus a few Fenders and others). The 4001 is the best instrument I own but I don't gig with it. I play the 4003 the most, by far, of any of my basses. It is my 1st choice for whatever music I'm playing or project I'm working on - and I actually get requested by musicians and sound men to play it, it sounds THAT good. It feels, plays, sounds and IS exactly right. It plays itself and all I have to do is drive it from place to place and plug it in. If that's not a "10" I don't know what is.

DISCLAIMER: All Rickenbacker instruments are, to a great extent, hand-made (at least, hand-finished). This means each one will feel a little different. I've found some 4003's with thicker, rounder necks than others (I prefer the wide, shallow/thin necks) and some that had very high action due to the factory cut of the nut. If you are one of those enlightened individuals who are looking to acquire a Rickenbacker bass, try as many out as you can (just like with any manufacturer). Not all Rickenbackers are perfect: just most of them are near-perfect. A good 4001 has to be THE fastest bass in the known universe. A good 4003 is probably the 2nd-fastest.

General neck dimensions are (on paper) the same as a Fender Precision. And some of the rounder, fatter Rick necks do feel (and play) like a P-bass. Same width at the nut. But the radius seems flatter on a Rick, the neck IS slightly narrower at the heel (which, being neck-through, is much more comfortable than any bolt-on), and the best ones (to me) have much flatter thinner "C" neck depths than Fenders (which are generally rounder). Slightly different scale as well, and I find the Rickembacker more comfortable to play plus, using the exact same gauge of strings between the 2 the Rick's strings seem to feel "tighter" and much less loose and floppy than a P-bass. The fretwork is MUCH superior on a Rickenbacker. Lacquered necks, and lacquer over the fingerboard. Admittedly, the looks are aggressive and I will sometimes favor playing a P-bass if the gig is "more subdued"/acoustic or if there's a high probibility of beer or other projectiles being cast at the band. God, I hate those gigs. Those people don't deserve to hear a Rickenbacker anyway.

I love this bass. I'm changing my rating back to "10".

My current rig is an Ashdown ABM-500 "bass magnifier" through a David Eden 410XLT cabinet. No effects. With any of my Rics plugged in and the EQ scooped (roll off the bass a bit), it is my opinion that this is what the voice of GOD must be like.

Yes, the pickups are single coils. Yes, they hum. And in all honesty, if the (small) venue has me standing under more than one neon sign I will often opt to play a Precision. But in most situations, as with any single-coil pickup, once you play the hum is not heard.

Incredible rich, ringing, "woody", growly (in the best possible way), sweet, * authoritative * tone. Great description: authoritative. I'm a finger player, and play between the pickups not at the bridge , and the neck-through construction, all-maple neck and body and the high-output single coils give me great punch and crisp attack without being overly brittle or muddy. But the bass CAN get very muddy - with my technique, anyway - and very brittle so watch your EQs on your amp. This is NOT a slap-and-pop funk bass, as it is far too hard, bright and brittle-sounding when played that way (get a Jazz Bass if that's your style). Rickenbacker basses are not very forgiving of sloppy technique - if you mis-fret, you and everybody else will hear it. But it is (to everyone else's astonishment, not mine) an incredibly versatile instrument with a wide range of tones. If you haven't heard a Rick bass (and you have, but you might not know it), I describe it as a better, ballsier Jazz Bass. Sorry, Fender Musical Instruments Corporation (I play your products as well, so I think I'm a fair comparitor).

I play, or have played, country and/or western (both kinds of music, my a@@), original art rock ala King Crimson, Irish/Celtic "bad Irish pub music" with a rock bent (studio and gig work for all of those), indie rock (studio soon!), Beatles cover band (sharing time with a Hofner), a rock cover band that was primarily based on RUSH and Police tunes, some jazz and "praise and worship music". A Rick can and will cover it all - except the slap-and-pop style, as discussed. And it will not just "cover", it will excel. It can and will fit in to so many styles - yet it always sounds like a Rickenbacker. That is a wonderful and glorious thing.

Lots of Rick bass players out there are Chris Squire (YES) fanatics or Geddy Lee (RUSH) accolytes, and make use (sometimes TOO much) of the high-end sonic range of these guitars. There is SO more to them than "Roundabout" or "Spirit of Radio", tone-wise. For you jazz players, can you say "wood" and "growl"? And if you want it to sound like an upright, use the built-in bridge mute! For you country and/or western players, take the round solid fundamental bass tone of a Precision and add a bit more tonal definition and twice the sustain. For you rockers out there, of every generation, these basses have more balls and "in your face" tone and attitude than you probably need.

Factory set up was, as I remember, a tad high but very good. I have a very light touch so I can get away with pretty low action. And most Ricks can achieve incredibly low action. Fretwork (installation and crowning finish) is impeccable.

Neck is straight as a board (no pun intended) and rarely rarely rarely needs the truss rods tweaked. When it does, I take it to a trusted guitar tech/luthier. I'll take an allen wrench to any Fender and not care, but I don't trust myself with a Rick and they mean that much to me that I don't work on them myself! These "tune-ups" occur maybe once or twice a year. Stays set-up, stays in tune. Period.

Rickenbackers just OOZE quality and attention to detail. They are not just instruments, they are works of art. Fit, finish, nut, hardware, routing, pickups (installation, height), binding, fingerboard inlays and controls were and still are all PERFECT. I, like many 4003 players, removed the pseudo-horseshoe-looking bridge pickup cover plastic thingie from all my Rick basses.

Even though they look absolutely gorgeous and delicate, they are NOT flimsy. The finish looks as good today as the day I bought it. The hardware is just as bright. This bass gets gigged: sweat on for hours, hauled around from freezing to stifling, wet to dry to wetter (I live around Portland, OR). It's a working guitar. I take pretty good care of if, and even wipe it down sometimes and I make sure nothing crashes into it. But I have never polished any of my Ricks (I have a 330FG as well), and you'd never know they weren't brand-spanking new. I don't know what voodoo Rickenbacker does to their people and materials but the end product is absolutely incredible.

Even if you are not in the market for a Rickenbacker but have read this review, please just your next trip to the music store: check out a Rickenbacker and compare its quality to Fender, Gibson or anybody. Then check the prices. Then, stand in amazement and wonder.

If you haven't already gathered, I am a gigging, working part time musician (meaning, I have a day job). This 4003JG gets played. It gets played a lot. Unless I specifically have a gig that calls for music that I feel requires a Fender (or, as stated, I'm under more than 1 neon sign and it's a very small venue), this 4003JG gets the call and goes it with no back-up. I trust these instruments and have years of experience on which to base that trust. I don't need a back-up.

I've been playing Rickenbacker basses since (gulp!) 1980 and I have NEVER needed a back-up for a Rick. I've had pickups and pots die on P- and J-basses, had tuners come lose on Yamahas. I've never broken a neck or headstock (yet - but I'm pretty easy on my instruments) but I have knocked bolt-on necks out of alignment (great thing about Fender - just knock it back!). I have NEVER had ANY problem of ANY kind with ANY Rickenbacker. I broke 1 string, once, at a rehearsal in 1984 (on my arctic white 4001, which I still miss with all my heart - it was stolen, along with a pre-CBS P-bass - and all I miss is the '72 4001). That's it. That is the full extent of "problems" that I have experienced with a Rickenbacker bass: NONE.

Rickenbackers look like the delicate ballet dancers of the guitar world, but they are absolutely reliable, dependable and tough as nails. I can't even imagine how much playing it must take to rub away some of the finish! I've had this 4003JG for almost 6 years and it's as good as new. Incredible!

Rickenbacker has this thing about tiny strap buttons. I'm a big guy and don't jump around, so they work fine for me and I've never had one come lose (I have knocked my bass off the strap, however). But I would recommend strap locks.

I've written 2 letters to Rickenbacker Instrument Corporation over the course of 20 years. Both, they answered within a business week (given a week for regular mail transit). In the 1st letter I asked the year of my 4001 (arctic white, which I bought used and was the finest instrument I've ever owned). Obviously, this was way before Al Gore invented the internet (yeah, right). In the 2nd letter I wrote to praise their products and to ask that they change their instrument cases to better support the neck of the guitar. They wrote back thanking me for my praise (no form letter here) and said that they had already changed the cases to better protect the entire instrument. The black molded modern Rickenbacker cases are the result of that change (had nothing to do with me - I just brought it up). I think that was in the late 1980's. I've also called them, looking for information about vintage instruments sales (which they don't do). I talked to an actual person after a hold of about 10 seconds, and they were polite, friendly and seemed to enjoy working for RIC. I remember that the person alluded to the paint crew being at the beach right now, or something. That was years ago and they are probably more "professional" now. I enjoyed the call. Other than that, I've never NEEDED to contact them.

I'm familiar with a few techs and guitar salespersons, and they have mentioned that RIC is not perfect and sometimes a unit comes in that is seriously flawed (usually from shipping or storage - don't put anything with chlorine in contact with your Rick's finish!). Those individuals have indicated that Rick backs their product, and takes back and replaces any damaged goods. Any such damage/warranty work must be shipped back to Rickenbacker in CA.

One reviewer of Rick guitars in this forum mentioned that Rickenbacker should have authorized repair facilities throughout the USA. I do not agree with that reviewer. Rickenbacker assembles and finishes (paints) 10 to 12 instruments at a time. They are NOT a huge mass-production machine like Fender. And they don't have mass-production qualities like easily-replaced bolt-on necks. It seems to me that Rickenbacker wants its' customers to be amazed at their quality. Anything bad enough to warrant warranty work would likely damage the finish - and Ricks should be near-perfect, at least. So I think it right that Rickenbacker would want the damaged instrument back to replace it, if nothing else. My opinion.

I'm giving them a "10" based on the 3 times I have actually contacted them, plus the fact that NONE of those contacts were because of a problem.

I've been a bass player since 1980 when I heard RUSH, "Free Will", and decided I HAD to play whatever the heck that was! After only a few months of playing (Peavy T-40, baby) I stumbled across a used, beat-to-hell with cigarette burns galore, rusted brown and hairy with mold strings (I'm not lying) arctic white (fading to yellow) with black binding and plastics (chrome hardware) Rickenbacker 4001. I knew Geddy Lee played a Rick 4001, so I had to have one. This one was in a pawn shop / hardware store in Longview, TX, and the proprietors did not know the 1st thing about Rickenbackers. It felt like nothing I had held before (Peavy, Fender) and I KNEW that this was a great, if neglected, instrument. I plugged it in to the "Rick-O-Sound" input to try it out and (low and behold!) the bridge pickup just didn't work! The shop, not knowing any better, assumed it was damaged and so gave me a tremendous deal just to get some cash out of a "broken" beat up guitar. Don't try this con in the big city, where they understand how stereo inputs work! I played it for years with no back up and only later along side a pre-CBS P-bass. Both were stolen and I still mourn the 4001.

I've invited fellow bassists to try out a Rick, especially the "new" 4001V63 (I want one, but can't justify it yet). The comments range from "Better than I expected - it's really a nice instrument" at the low end, to "WOW! What an amazing bass!" and "Amazing tone! My God!". These comments come from Ken Smith and Fender American Deluxe players. I haven't sold one yet, per se, but I've got quite a few locals players admiring them and recognizing how many recordings have been made with Rick basses.

But they are not for everybody. And it's fine that not everybody has or plays a Rickenbacker - it makes them that much more special. And, honestly, if someone is starting out and needs a single instrument to cover all the "bases", I wouldn't recommend a Rickenbacker. I would, and have (many times), recommended a Jazz Bass. I no longer play J-basses, prefering P-basses and my trusty Rickenbackers. What can I say? I'm a wide neck nut.

If this particular 4003 was lost/stolen/destroyed I would be very angry. Every instrument is different and this one would be hard to replace. But I would look around and "feel" them all and would likely find a 4003 just as nice. Maybe even better.

I own (and play, from time to time):
Fender - P/J "California Special" that I've ripped off the Jazz neck in favor of a Fender '57 reissue P-bass neck,
Fender - P/J with fretless Jazz Bass neck,
Fender - 1957 reissue P-bass,
Fender - Mexican Standard P-bass (for outdoor raining gigs or beer-throwing gigs - I hate those),
Yamaha - BB1600,
Hofner - 1967 5000/1 (with oatmeal "thud" tone),
Rickenbacker 4001,
Rickenbacker 4003S,
and this Rickenbacker 4003.

Dual truss rods, rosewood fingerboard, fine hardwood single piece construction, mirror-like finish, separate volume and tone for each pick-up, etc., etc., etc.. What more do you need?

I play several styles, but mostly hard rock, punk fusion, and some soft jazz. The 4003 works great for all of these styles. I use the 4003 with a Trace-Elliot combo amp. I pre-amp it with a vintage Bass Rockman, which has a mild chorus and good compression already built into it, with optional KILLER distortion. The sound is large, versatile, and unique. It sounds great on stage and in studio. What I like most about it is the Rick-O-Sound feature, which I use to run separate effect loops from each pick-up. Through the treble pickup I run modulation effects (stereo chorus, flange, and slap echo), and through the bass pick-up I run another chorus, EQ (for punch), and digital delay. The possibilities when using this are infinite. Just don't buy the overpriced Rick-O-Sound cord for this. A Y-Jack with a Hosa dual cable works just as well for this.
In sum, I love the sound produced from the 4003 and the versatility it has to expand on it. No other bass I have played comes close.

I bought my 4003 several years ago, and received it fresh from the factory with absolutely no flaws. Like fine wine, it has only gotten better with age. It has taken a lot of abuse from touring and bar-banding, and held up well. The only suggestion I have is to have an authorized dealer do the repair/maintenance work on it. The last time I had it re-strung and the intonation adjusted at a non-Rick shop, the action was set so high that I could not play it and it would not tune accurately.

As I said, this bass is solid as a rock. I have never used a back-up, even when I broke a string during a performance (just play it with three and get on with it!). I have played it all over the country. It has been dropped, kicked, left out in 110' Phoenix sunshine, and still looks and plays brand new.

The company always returns my calls and responds to my mail requests immediately. The Rick web site is awesome, with specs on all parts and the ability to order them.

I have been playing for over 22 years. I have owned a P-Bass, a Jazz Bass, and a Peavey Bass, but gave them up when I discovered the wonders of the Rick 4003. If it were stolen or lost, I would replace it in a heartbeat, regardless of cost. There is none like it!

The absolute coolest bass in the world. Now when it comes to fingerboards I don't usually like maple...but with maple with a satin finish can't get much better. It has bass/treble volume and tone nobs, for a very wide range of sound.

I got this bass for the sound, I'm not gonna kid anyone about that. The mid-range punch of this bass is amazing. I play mostly dream-pop/shoegazer stuff, and the Ric through my SWR cuts through prefectly. Best bass I've ever heard period.

The action was great I got it. A lot of people seem to think the pickup cover gets in the way, but I always play behind it and never had a problem. This color is amazing. I got the Jetglo, I was considering midnight blue, but it wasn't dark enough for me. When it comes to Rickenbacker you can't beat Jetglo

I haven't had it that long, but I think it's pretty sturdy. I would gig with my Epi Viola bass as a backup, only because I want different sounds for some songs.

Never had to deal with them so I can't give you a rating, but I know that Rickenbacker is a small little company and I'm sure they would take care of any problems I might have.

It's been my dream bass since I started playing. I mean it's a Rickenbacker! When I got it, I thought it was pretty insane...me with a Ric, who would have thunk it?

I'll just submit a single review for two 4003 Rics that I own...91 Mapleglo/98 Midnight Blue. Features....hmmmm....just your basic 4003's, nothing special added. I do prefer the newer SKB case to the older style...it takes more of a beating (without tearing the tolex, since there is none) and is noticably lighter a 3am after a gig.

My rig is an Ampeg SVP-Pro preamp, Ashley 1000 watt power amp, and an EV 4-10 cabinet (and various effects). The sound is sweet perfection. The sustain, growl, punch and tone are unbeatable. The lows are low and non-muddy and the highs are clear and bright. The best part is the sound is so unique to a Ric that it makes it's presence known without drowning out anyone else in the band. It's tone cuts through the mix to be heard but not at all overpowering. I play in a Metallica tribute band (also some Pantera, White Zombie, Motorhead, etc.) and there is no other choice for a bass for me. I've had other brands of basses (alot) and they are all gone (except for my 1st) because the Rics are perfect for my style and taste.

Both basses were set up well fom the factory, any instrument is going to need some tweaking to set it up perfect for you and Rics are no different. This is where my one minor complaint comes to mind....that damn bridge....once it is set, it never needs to be touched again....ever, but it is a pain to adjust. Don't get me wrong, I love the looks and it is a "set and forget" bridge and I wouldn't change it....but all that being said, I hated to do the initial adjustments. The finish on both Rics was excellent from the factory, Rickenbacker has an excellent paint process that is obvious to anyone that views the mirror finish. The 91 Mapleglo arrived as ordered in perfect condition and almost 10 years later, the only flaws are that the finish is wearing slightly in "high use areas" but this only lends to the character. The 98 Midnight Blue is a different story. I fell in love with it for it's beautiful color and wanted it for an upcoming gig (at the time). It wasn't until I got it home that I noticed that several of the fret markers were cracked and there was a small dent/paint crack in an obvious part on the face. I was already "bonded" to this bass and instead of reurning it to the store, I opted to keep it and have it repaired later. I don't know if it came like this from the factory, if it happened during shipping, storage or display at the store.

I have subjected these fine instruments to conditions which they should never see. I have spilled beer on them, cut my hand during a set and bled on them, and at show I think the 91 Mapleglow may have been vomited on (I'm not sure exactly what it was, but it sure looked like puke). Nothing ever needs adjusted. They always sound excellent and there is no issue with dependability. The finish wearing that I mentioned above has been through extreme hard usage and my aggressive playing...I would expect no other finish that looks as good as a Rics to last any longer. I replaced the Ric strap buttons with Dunlop strap locks, just because I like 'em. I don't think there is a more durable and reliable bass made. No batteries, no complex wiring, no active gadgets, neck through construction, dual truss rods, need I say more??????

They have been helpful with the planning of me sending in the 98 Midnight Blue for the problems described above. We'll see if the 5 year warranty is void because of some stupid reason once they get my bass. Other than that, no opinion

I have been playing for 15-ish years and have had many other basses. As far as the styling and the sound goes, either you like it or you don't. If you like it, you will not be disappointed in the purchase of a Ric. I have sold all of my other basses because they are not necessary anymore, yet I always want another Ric (Just bought a used 4003S-5 :-). I had other wonderful basses and once I got my first Ric, I just didn't want to play the others anymore, they made me feel cheap.

It's a regular 4003 produced 1998 with all the known features.
I like the strap lock pins (Schaller like)come with it from the factory, so no need to change some weird strap pins. The bass p.u. handrest IS PLASTC !!! (had some old 4001 with metal one). Although I removed it anyway, this change from metal to plastic makes the bass appear cheap! But it reduces the weight as the given specifications (9lbs)are easyly overrun by 2-3lbs in some pieces. I'm lucky - I got a light 4003. The other ones not only hurt your underarm with the sharp body binding but also your shoulder after playing a 2hrs set. The pick up switch tends to surprise you by slapping back to the middle position when touched by chance during playing. The neck string saddle positions the G-string too close to the fingerboard edge and not 100% over the p.u. pole pieces. I fixed it right and had to remove a bit of the low string side. Eversince the setting is near perfect. I agree with all others: The original bridge is an unacceptable relict of the past. I exchanged it with a replacement Rick bridge copy of "ALL PARTS" from the guitar shop "Rockhaus", Milwaukee. That's the best one can do. Came with a nice siver, but heavy OHSC.

I play the 4003 over a customized (EV15-B) Peavey TKO-80 combo. Every grafic-eq-parameter flat main bass control +3dB (2 o'clock), main treble control 0 (12 o'clock). This really rings, growls, bangs,... with an endless sustain!!!
About the versatility of the sounds: I don't know about the other Rick player in the survey what kind of strings they use, but A RICK NEEDS NICKEL STRINGS! They give THE SOUND!! My bass has very different sounds in the 3 p.u. selector positions: from near P-Bass to near active Alembic pick, also different for finger picking, tapping, slapping and plektrum . It is more sensible and versatile than my other 4 string MusicMan (active, incl. a custom 3-way selector like the 5-string version).
I use it for all kind of Rock, Blues and Gospel. Life, it can be located easily, gives a clear cut through all instruments and supports the band with a pound of bass that is round, but does not drown any other instrument of the band. No studio exerience with it.

I don't know about the factory string settings, but most of the 4003/4001 seem to have a too high one. The neck has to be set very carefully and exact for a suitable lower string setting. As the old 4001 necks tend to separate from the fingerboard when you tighten the truss rods for straightening, the necks of the 4003 bend aside left or right, depending on what truss rod you tighten more. That implicates an additional problem with the E or G string regarding their p.u. polepiece position (see above). But when I finally got the neck right it plays fast and like butter, with no buss, even when slapping or tapping.
The wood and its fireglo finish are marvellous, but sadly: it's UV protected, so the finish does not age by darkening (the 4001 fireglo finish had that pretty effect).

The overall construction is durable and solid. The p.u. selector switch is already a bit loose in the single p.u. positions compared to the middle position. If I wouldn't had the hand rest of the bass p.u. demounted, this cheap plastic piece would already be broken during slapping. Truss rods, once they're in right neck position, never need to be adjusted, only if you change to a very thick gauge 105+ to 55. The bridge basic plate material is a bit too soft, I experience when fitting the ALL PARTS Rick bridge into it and extending the holes of the screw for height adjustment.
For life purpose I don't use a back up as I keep my basses constantly in working condition (this one doesn't even need a battery).

One of the knobs (bass tone) is double, so I ordered the bass volume knob about half a year ago. Since today the general dealer for germany (Warwick) didn't get it. Asking about the oddity that the tone blend of one p.u. effects both p.u. when the selector switch is in the middle position (did anybody else realize that??), I didn't get any answer at all. But e-mail questions about the recommened strings were answered prompt.

I'm definately not one of these uncritical Rick fetishists. I tried 2 different 4001's (1 model of 1976 and one of 1978)and 2 4003's (1982), this is the best of all. If you like the sound and design (I love to play it and to look at it) it is the best bass to get!!
The company can shure be proud of the making, finish and sound of the bass, but when it comes to the constructional oddities it runs into the problem of receiving a pityingly smile. The change of the strap pins to the Schaller strap lock system and the hardware ofthe 4004 show a possible way out to newer developments. Otherwise the only future of the 4001/4003 could be as sampled sound for these PC cracks (they don't care about the originating instrument)??!!
The often critizised playability (problems with string height and neck adjustment) may only be suitable for players with the feeling of a steemhammer worker (to justify the use of such a sensible instrument by Motorheadbangers). I don't hope that this is the target customer of the marketing, but when looking at the Rick-homepage(Lemmy-spot)I get some doubts. On the other hand this would explain the factory settings and the neglectance of the constructional problems. As I play bass and know the oddities of the 4001/4003 for nearly 20 years I could adjust it to my needs by myself. If you bring it to a luthier, to get the 4003 working like mine,it can easily cost you another half grand so the price of a Rick with top playability could reach 2000,- !!!
Besides my customized MusicMan Stingray and a Squier Proton Precission 5-string with EMG active electronics (also customized) this is my main instrument, so I hardly play the Stingray any more.

This bass really plays anything:Funk, Rock, Blues, Jazz (but you need a compressor, might i recommend an ADL because Nathan East uses ADL), ska, hip-hop (but very limited usage also use comp.). With my urge as a bassist, i modified the neck pickup by adding shims to the screws so the pickup sits lower from the strings. I didn't do a sucky jobs like medeocre guitar players that lower the pickups and they hang loosely and wobble, i made the pickup stable and low so i can Slap With confidence and without that damn tapping noise! This bass is great

The only reason people say that the bass doesn't sound like squire's or lee's is because they are narrow minded! Do you think chris squire plays out of the amp you have?He plays through a $30,000 Custom rig! Also, did you know that he hooks up to sound modulators and eq's. do you really think he hooks up to an amp and thats it?Do You? Do You?! My bass sounds exactly (not over-emphasizing either) like chris squire's and I have to hook up to a digitech BP8 tube preamp, a DOD psycho-acoustic floor pedal, a DOD preamp grind pedal, a boss EQ, a boss synth, And i have to use the roto-sound and standard jacks! The only thing I need now is a sansamp DI and an Ampeg B-15 Portaflex(Ampeg is the best for prog rock along with SWR and MusicMan Amps:yes they make amps too). The people that can't get the sound honestly have to pay for it. I did and I'm only fourteen! about 1500 bucks all together (Its called sacrifice, I have no videogames, computers and sporting equipment. The pawnshop has it all now! Heh Heh, suckers!) Oh god I have no life....

There were only two reasons i bought this bass: Lee, and Squire among others (Mcartney, REM, Motorhead, etc.) and it just plain kicks beehind baby! i bought this bass after playing a fender jazz bass with a warped neck and action so high, i could put my wrist between the strings and fretboard (Fender's awesome just incase you think i'm raggin' on 'em) and i could still play "heart of the sunrise" as fast as Squire, And when i played the Rick, I didn't know that I could move that fast on the laminated frets! Heaven, pure Heaven!!!

I'm so anal about this bass but whats the point, this things laminated with titanium and chrome plated with kryptonite (metaphors, people. Metaphors)

Love it or hate it. If you love it, good for you, if you hate it, I'll smack you. I've compared it to modulus (Flea), Alembic(Emerson, Lake and Palmer), Stingray (King Crimson and SuperTramp),Fender (Mainly Grand Funk, Jethro tull), Yamaha (Nathan East, Foreplay, I'm probably gonna' get that next), Kramer (Aluminum neck bass), Gibson grabber and ripper (Led Zepplin), Hofner (just guess), Ibanez (They just suck!) and if i had a nickle for every time i said "Do you have any ricks?"

1998, Natural finish maple. Double truss rod, full scale, neck through design. It's a basic, high quality axe with the finest hardware and proven humbucker pickups. I bought it new. I'm afraid to try the stereo output because I might like it and have to buy another amp. It comes in a case that will fully protect it and hold up to airline baggage handling gorillas.

Nothing sounds like a Rick. It's great for fingers, slap, tap, pluck, ghost notes, etc. I have yet to find it's limits. Driving the sound through an SWR 350 & a Gloiath cabinet I can set of burglar alarms on cars 3 blocks away and kill small amimals with ease. After 34 years of bass experience I can truely say this is the finest instrument I have ever picked up and believe me, I have picked up a bunch!

As near as I can tell it is perfect. I can't find even a tiny flaw. The action was set up perfect right from the factory. I like a low action. The intonation is also very close. I have small hands so the slender neck suits me to a "T". If your knuckles drag the ground this may not be the bass for you.

I can unplug it in the middle of a preformance, take it outside, bust all the windows out of three sedans with it, walk back in, plug it in and finish the preformance, without retuning it. In short it is built like a jackhammer.

No dealings with them yet.

As soon as I get a few more coins saved up I plan to buy a Rick 5 string. If I have two of them I can use them for loading ramps for my dragster in between gigs. I started out with some of the fender junk back in the 60's. I've played everything except for a few of the newer brands.